您要查找的是不是：
- Checking the Break-point in Aqueous Development of Dry Film Resist 水溶性干膜显像点的测试
- dry film resist 干膜抗蚀剂
- water peeling dry film resist 水粗加工干膜保护层
- Dry film thickness measured on a smooth test panel. 干膜厚度应在平滑的样板上测量。
- The thin, dry film formed by such a mixture when applied to a surface. 已干油漆层用于表面时这种混合物薄而干的膜
- Part to have a non-sticky dry film rust preventative. 分开时不要有粘而干的锈覆盖物。
- The thin,dry film formed by such a mixture when applied to a surface. 已干油漆层用于表面时这种混合物薄而干的膜
- It has good printing adaptability.The dried film can provide good adhesion, clear printing line and high resolution and resist to plating copper, tin, nickel and aurum. 附着力强，丝印滑爽，线条清晰，分辨率高，可进行镀铜、纯锡、镍、金等电路板所要求的图形电镀作业。
- Furthermore, a poorly dispersed system results inferior mechanical properties of the dry film. 而且,差的分散体系导致干膜的机械性能变差。
- The parylene anchor with very deep semi sphere recess is fabricated utilizing the dry film photolithography technique. 聚对二甲基苯固定器拥有一个非常深的半圆形沟槽，这是运用乾式薄膜光阻的技术制作而成。
- "For dry film lamination, is the temperature of the lamination roller checked and verified using an infrared meter? 对干膜压膜，是否有对压膜滚轮温度进行检验并对红外线表表进行确认？"
- Objective: To test and analyze density of medical dry film varying with temperature. 目的:测试与分析医用干式胶片密度随温度的变化。
- "Is there objective evidence to demonstrate that all dry films and/or liquid resist are stored in temperature and humidity control environment? Also, inventoried under FIFO with expired date control? 是否有证据可以证明干膜或是湿膜储存在温度与湿度管控的环境内？并且，到期管控有先进先出目录？"
- PTH hae toxic resolution, Dirll and CUT use laminate contain harzous substance,the Dry film and Wet film use the oil also contain toxic substance. 那就多的去了,从一开如的开料树脂粉尘到湿流程的甲醛/氨水/盐酸/硫酸/氰化物;
- "Is the temperature of the PCB panel/ lamination roller checked and verified using the infrared meter at the entrance to the dry film laminator? 是否在进行干膜压膜时，对PCB温度/压合滚轮进行红外线确认？"
- However, its use is not recommended in dry films thinner than 1 mil (25um). 但是它不被推荐到稀释剂干膜层低于1 千分之一寸（25微米）的材料上。
- The experimental results indicated that the film resistivity of the sample annealed was reduced significantly and only one 3.17 of the unannealed. 实验结果表明：退火后样品的薄膜电阻率显著减小，是未退火样品薄膜电阻率的3.;17分之一；
- Approved and tested lubrication methods include lithium stearate grease, MOS2 dry film, most oils, greases and moly pastes. 核定和测试润滑方法包括硬脂酸锂润滑脂，二硫化钼干片，大多数油，油脂和钼膏。
- That was infinitely better than his last film. 这比他上一部电影不知胜过多少倍。
- Dry Film Developing: After the dry film is imaged, the unexposed soft areas of the film are dissolved away while the hardened dry film remains unaffected. 显影：干膜中未曝光部分的活性基因与稀碱溶液反应生成可溶性物质而溶解下来，曝光部分的干膜不被溶解。
