您要查找的是不是:
- dry film photo resist 干膜光保护层
- dry film photo processing 干膜抗蚀剂光刻工艺
- Dry film thickness measured on a smooth test panel. 干膜厚度应在平滑的样板上测量。
- The thin, dry film formed by such a mixture when applied to a surface. 已干油漆层用于表面时这种混合物薄而干的膜
- An exceptionally clear adhesive can be made from fish and was the first adhesive used for photographic emulsions for photo film and photo resist coatings for photoengraving processes. 从鱼身上可以提取制成极其透明的粘胶,在胶片的感光乳胶和光刻蚀工艺的光阻涂层中首先被用作粘合剂。
- Part to have a non-sticky dry film rust preventative. 分开时不要有粘而干的锈覆盖物。
- Electroformed apertures reproduce the mandrel photo resist finish faithfully and do not require any further processing. 电铸复制卷筒照片孔型图,不需要进一步的加工。
- The photo resist consists of binder polymer which makes the photopolymer alkaline soluble, multi-functional monomers, pigments, photo initiators and solvents. 彩色光阻剂的主要成分包括:碱可溶性树脂、光固化树脂、颜料、光引发剂、有机溶剂以及添加剂。
- The thin,dry film formed by such a mixture when applied to a surface. 已干油漆层用于表面时这种混合物薄而干的膜
- R.C.Chang, C.T.Chaung and P.H.Yang, 2005, Dynamic property analysis of photo resist thin films by using nanoindentation, The 22nd National Conference on Mechanical Engineering, Chung-Li, Taiwan. 陈芃宇,张瑞庆,萧俊卿,2005,不同薄膜于奈米压痕及奈米刮痕实验之特性,精密检测及奈米技术研讨会,台北,台湾。
- It has good printing adaptability.The dried film can provide good adhesion, clear printing line and high resolution and resist to plating copper, tin, nickel and aurum. 附着力强,丝印滑爽,线条清晰,分辨率高,可进行镀铜、纯锡、镍、金等电路板所要求的图形电镀作业。
- Furthermore, a poorly dispersed system results inferior mechanical properties of the dry film. 而且,差的分散体系导致干膜的机械性能变差。
- The parylene anchor with very deep semi sphere recess is fabricated utilizing the dry film photolithography technique. 聚对二甲基苯固定器拥有一个非常深的半圆形沟槽,这是运用乾式薄膜光阻的技术制作而成。
- Li Bing ice films photo is reincarnate and fashionable white-collar, all exhibit professional female elegant demeanour. 李冰冰拍摄写真化身时尚白领,尽展职业女性风采。
- "For dry film lamination, is the temperature of the lamination roller checked and verified using an infrared meter? 对干膜压膜,是否有对压膜滚轮温度进行检验并对红外线表表进行确认?"
- Objective: To test and analyze density of medical dry film varying with temperature. 目的:测试与分析医用干式胶片密度随温度的变化。
- The cross-section of bump is like mushroom, and it is formed when the electroplating plate thickness is higher than the photo resister. 断面形状像茸状的bump。镀层电镀得比电镀光阻的厚度高而形成的。
- PTH hae toxic resolution, Dirll and CUT use laminate contain harzous substance,the Dry film and Wet film use the oil also contain toxic substance. 那就多的去了,从一开如的开料树脂粉尘到湿流程的甲醛/氨水/盐酸/硫酸/氰化物;
- PEP uses photo resistive sensor to obtain expected wiring with necessary thickness in specific etching environment Pitch. 使用感光光阻,仅就必要的厚度来蚀刻特定的场所以得到希望的配线的方法。
- "Is there objective evidence to demonstrate that all dry films and/or liquid resist are stored in temperature and humidity control environment? Also, inventoried under FIFO with expired date control? 是否有证据可以证明干膜或是湿膜储存在温度与湿度管控的环境内?并且,到期管控有先进先出目录?"