您要查找的是不是：
- Study on FM-110 Dry Film Lubricating Material FM-110干膜润滑材料之研究
- dry film lubricant 干燥膜润滑剂
- Dry film thickness measured on a smooth test panel. 干膜厚度应在平滑的样板上测量。
- The thin, dry film formed by such a mixture when applied to a surface. 已干油漆层用于表面时这种混合物薄而干的膜
- Adhesion of Dry Solid Film Lubricants, Method of Test for (05. 干式固体薄膜润滑剂的粘合性的试验方法(05。
- Part to have a non-sticky dry film rust preventative. 分开时不要有粘而干的锈覆盖物。
- The thin,dry film formed by such a mixture when applied to a surface. 已干油漆层用于表面时这种混合物薄而干的膜
- dry film lubrication 干膜润滑
- Corrosion Characteristics of Dry Sold Film Lubricants, Method for Determining (05. 干性固体薄膜润滑剂的耐腐蚀特性的测定方法(05。
- Thermal Shock Sensitivity of Dry Solid Film Lubricants, Methods of Test for (05. 干式固体薄膜润滑剂的热冲击敏感性的试验方法(05。
- Furthermore, a poorly dispersed system results inferior mechanical properties of the dry film. 而且,差的分散体系导致干膜的机械性能变差。
- The parylene anchor with very deep semi sphere recess is fabricated utilizing the dry film photolithography technique. 聚对二甲基苯固定器拥有一个非常深的半圆形沟槽，这是运用乾式薄膜光阻的技术制作而成。
- "For dry film lamination, is the temperature of the lamination roller checked and verified using an infrared meter? 对干膜压膜，是否有对压膜滚轮温度进行检验并对红外线表表进行确认？"
- Solid Film Lubricant Used in Aircraft 飞机用固体膜润滑剂
- Objective: To test and analyze density of medical dry film varying with temperature. 目的:测试与分析医用干式胶片密度随温度的变化。
- However, its use is not recommended in dry films thinner than 1 mil (25um). 但是它不被推荐到稀释剂干膜层低于1 千分之一寸（25微米）的材料上。
- PTH hae toxic resolution, Dirll and CUT use laminate contain harzous substance,the Dry film and Wet film use the oil also contain toxic substance. 那就多的去了,从一开如的开料树脂粉尘到湿流程的甲醛/氨水/盐酸/硫酸/氰化物;
- Hydrodynamics, elastohydrodynamics and squeezing film lubrication analysis on lubrication model of gear transmission with belt as meshing medium indicate the belt make lubricant film easy to come into being even water used as lubricant. 在建立带式啮合介质齿轮传动的润滑模型的基础上,通过对润滑模型的流体动力学润滑、弹性流体动力学润滑和挤压膜润滑进行分析发现,由于介质带的存在,润滑膜很容易形成,甚至可以形成具有相当承载能力的润滑水膜。
- "Is the temperature of the PCB panel/ lamination roller checked and verified using the infrared meter at the entrance to the dry film laminator? 是否在进行干膜压膜时，对PCB温度/压合滚轮进行红外线确认？"
- Approved and tested lubrication methods include lithium stearate grease, MOS2 dry film, most oils, greases and moly pastes. 核定和测试润滑方法包括硬脂酸锂润滑脂，二硫化钼干片，大多数油，油脂和钼膏。
