您要查找的是不是:
- Generator drive belt condition and tension. 发电机传动皮带的状况和张力。
- Loose accessory drive belt (water pump slipping). 辅助驱动皮带松脱(水泵打滑)。
- The generator drive belt is loose or worn. 发动机传动皮带松动或腐蚀了。
- Remove serpentine drive belt, refer to Group Cooling. 拆下蛇型驱动皮带,请参阅单元7-冷却。
- Install accessary drive belt (refer to Group 7, Cooling). 安装附属的驱动皮带(请参阅单元7,冷却)。
- Worn main bearing from excessive tension on drive belt. 驱动轮上的轴承因张力过大而损坏。
- Install the serpentine drive belt and tighten to obtain the specified tension. 安装蛇形驱动带,拧紧到规定的张力。
- This part of the machine locks into the special wheel there,to connect the driving belt. 机器的这个部件固定在那个特殊的轮子里,以便连通驱动带。
- This part of the machine locks into the special wheel there, to connect the driving belt. 机器的这个部件固定在那个特殊的轮子里,以便连通驱动带。
- For belt tension specifications, refer to Specifications-Accessory Drive Belt in this group. 关于皮带张力规格表,请参见本单元的规格表-辅助驱动皮带
- We have 10 injection molding machine 168 tons, welcome processing. 本厂有10台168吨注塑机,欢迎来料加工。
- Home-made vertical applanation MLB880 molding machine type. 国产立式平压平模压机有MLB880等型号。
- Tighten all compressor mounting bolts, the clutch mounting nut, the clutch coil mounting screw or nut, and the serpentine drive belt to the correct specifications. 扭紧所有的压缩机固定螺栓、离合器固定螺帽、离合器线圈固定螺丝或螺帽和蛇型驱动皮带螺栓至正确规格。
- Loosen the accessory drive belt tension and remove the belt from the power steering pump (refer to Group 07, Cooling Systems for proper procedures). 放松辅助驱动皮带,从动力转向泵上拆下皮带(有关程序,请参阅单元07,冷却系统)。
- A water-cooling system consists of the engine water jacket, thermostat, water pump, radiator, radiator cap, fan, fan drive belt and neccessary hoses. 一个完整的水冷系统包括机体水套,节温器,水泵,散热器,散热器罩,风扇,风扇驱动皮带和必需的水管。
- Be familiar with molding machine and their process parameter settings. 熟悉注塑工艺和注塑设备的性能。
- Drive belt and change gear to perform stabilized transmission of bottom weft and provide wider range of fabrics which be more superior in quality. 传动皮带使用高扭力时规皮带,齿轮搭配变速,纬底输送稳定,织物领域大且质量优良。
- Krauss-Maffei AG, Munich, Germany, “Mold Closing Device for Plastics Molding Machine, in Particular an Injection Molding Machine,” United States Patent Number: 5,858,421, 1999. 陈克昌,“射出成型机射出切保压控制方法之研究,”国立高雄第一科技大学机械与自动化工程系硕士论文,2001。
- A clutch engages and disengages the drive belt from the pedal crank, enabling the rider to filter the water while traveling or while stationary. 有一个可以控制在脚踏曲柄轴上传动带的传动器,使骑车的人在骑车移动或者静止的时候过滤水。
- High speed milling of mold has incomparable advantage comparing with traditional machining,and is developing direction of mold machining. 模具高速铣削加工具有传统加工无可比拟的优势,是模具制造的发展方向。