您要查找的是不是:
- These rosebuds haven't fully opened. 这些蔷薇花蕾还没有完全开放。
- The square black muzzle of Buller pushed the door fully open. 只见布勒用它那宽宽的黑嘴把门顶开。
- The period during which a flower is fully open and functional. 开花,开花期花朵完全开放的时期
- Visually inspect that the vent is fully open to pass test. 为了通过检测,目测检查排气口全开。
- The double lift cylinder used here for control purposes permits the gas needle and the valve stem to be opened and closed separately. 为控制灌装过程,机器上安装了一个双冲程气缸,气针和阀锥的打开和关闭可以分开进行。
- The flow coefficient (Cv) listed in the tables apply to fully open valves only. 表中所列流量系数仅适用于全开状态下的阀门。
- The measures of choosing suitable yarn,adopting flake locator,control heddle frame height,adopting multi-beam,adopting open shed,ad... 并指出在织造过程中应选择合适的纱线、采用分层定位装置、控制吊综高度、采用多织轴、采用全开梭口、采用多只梭子织造等。
- NB. The swaging head does not need to be fully open to release the assembly. 注:要取出总成后的胶管,扣压机头不必完全扩开。
- Since the coal is stored in the open shed, volume computations based on various reference heights have to be made for easy daily estimation to ascertain consumption. 由于煤炭是储存在开放的大棚,数量计算的基础上的各种参考的高度要取得容易,每天估计,以确定消费。
- Before taking a flow measurement reading, set the valve to its fully open (4.0) or at a preset position. 在获取流量测量读数之前,将阀门设置在全开(4.;0)或在一个预调的位置。
- The lowest %DFR circuit valve is the index valve and will remain in the fully open position. 最低%25DFR回路阀是指标阀,将保持在全开的位置。
- As these products become more desktop centric, they will need to support a fully open environment. 随着这些产品变得越来越以台式机为中心,它们将需要支持完全开放的环境。
- double lift double cylinder jacquard 复动式双花筒提花机
- As these products become more desktop centric,they will need to support a fully open environment. 随着这些产品变得越来越以台式机为中心,它们将需要支持完全开放的环境。
- double lift single cylinder jacquard 复动式单花筒提花机
- Visitors are unlikely to see the whole museum, not just because it is so enormous, but because it is never fully open. 游客们不大可能看到博物馆的全貌,不只是因为它规模庞大,也因为它从未全部开放过。
- Note: After test, all valves on test kit must be fully open and hose removed to prevent damage to test kit. 注:检测后,测试组件上的所有阀门都必须出于全开状态,并拆卸所有软管,以防止测试组件损坏。
- If the connection is to be made by soldering, turn the handwheel to the fully open position before applying heat. 如果是焊接连接,则在加热之前要把手轮旋转到全开的位置。
- Turn the valve stem counterclockwise until the valve is fully open and will not turn any further. 逆时针旋转阀杆直到阀门全开为止,不要旋转过度。
- Double-lift open shed Jacquard machine with oblique 复动式倾斜梭口全开口式提花机构