您要查找的是不是:
- Remove the check disc holder and guide assembly. 拆卸止回阀阀瓣压板和引导总成。
- Insert disc holder assembly back into seat module. 将阀瓣固定器总成插回到阀座模块内。
- Lift out disc holder assembly from body of valve. 从阀体上取出阀瓣固定器总成。
- Insert the disc holder assembly back into the seat module. 将阀座固定器总成插回到阀座模块内。
- Lift out the disc holder assembly from the body of the valve. 从阀门的阀体内提起阀瓣固定器总成。
- Replace spring insuring that it seats properly on disc holder. 更换弹簧,确保其正确位于阀瓣固定器上。
- Replace the spring ensuring that it seats properly on the disc holder. 更换弹簧以确保其能够正确的位于阀瓣固定器上。
- Assemble disc screw through disc washer and rubber and screw into disc holder. 将阀瓣螺丝穿过阀瓣垫圈和橡胶,安装到阀瓣固定器上。
- When reassembling apply a drop of low strength thread lock to disc holder. 在重新组装时,将一个低强度螺纹装置锁到阀瓣支架上。
- To reverse the seat disc, unscrew the disc screw and disassemble the disc washer and disc rubber from the disc holder assembly. 为了翻转阀座阀瓣,则要拧松阀瓣螺丝,从阀瓣固定器总成拆解阀瓣垫圈和阀瓣橡胶。
- First check assembly O-ring, Disc holder assembly, Cover O-ring and Sensing passage O-ring. 第一止回阀总成O形环,阀瓣固定器总成,阀盖O形环和感应通道O形环。
- You can find your product key on your computer or on the installation disc holder inside the Windows package. 可以在计算机上或者Windows包装盒内的安装光盘盒上找到产品密钥。
- To reverse the seat disc, unscrew disc screw and disassemble disc washer and disc rubber from disc holder assembly. 将阀座阀瓣颠倒,旋下阀瓣螺丝,从阀瓣固定器总成上拆卸阀瓣垫圈和阀瓣橡胶。
- Kit consists of: Second check assembly O-ring, Disc holder assembly, Cover Oring and Sensing passage O-ring. 组件包括:第二止回阀总成O形环,阀瓣固定器总成,阀盖O形环和感应通道O形环。
- Kit consists of: First check assembly O-ring, Disc holder assembly, Cover O-ring and Sensing passage O-ring. 组件包括:第一止回阀总成O形环,阀瓣固定器总成,阀盖O形环和感应通道O形环。
- When replacing disc holder, apply a drop of low strength thread lock. Do not over torque. 当更换阀瓣支架时,轻微压下螺纹锁。不要过力。
- NOTE: The disc holder should not be removed when servicing only the disc, remove allen head screws holding the disc retaining plate and replace disc. 注意:如果只是维修阀瓣,就不要拆卸阀瓣固定器,只需拆卸支撑阀瓣固定器板的六角头螺丝和拆卸阀瓣即可。
- Disassemble module. Use wrench to loosen stem nut and remove lock washer and diaphragm plate. Remove yoke by loosening disc holder using a screw driver. 拆卸模块。使用扳手松开阀杆螺母,并且拆卸锁紧垫圈和隔膜板。采用螺丝刀,通过松开阀瓣支架来拆卸轭架。
- Have you recorded the data in disc? 你已把那些数据存储到磁盘上了吗?
- You can't copy your file with this disc; it's full. 你不能用这张磁盘拷文件,这张盘满了。