您要查找的是不是：
- differential annealing process 局部退火深拉延法
- And a suggestion was made about proper softening annealing process. 在此基础上，提出了合理的软化退火工艺。
- The alloying annealing process of zinc layer is also described. 并对锌层合金化退火工艺进行了阐述。
- It can improve the quality of the annealing process and diagnose some failures. 该模型对改善玻璃退火窑运行质量，预测玻璃成型性能具有积极的意义。
- Metal fabrication, annealing process, simple designs are done to built more complicated projects. 金属制造，退火工艺，简单的设计，建造进行更复杂的项目。
- Long working life and small deforming can be realized by improving anneal process and quenching process. 通过改进退火工艺和淬火工艺,获得更高使用寿命和更小的变形。
- The resistivity and flexivity of the resistance thermostat metal change while the anneal process change. 当退火工艺变化时,电阻系列热双金属的电阻率和温曲率等主要性能将产生变化。
- Characteristics of MgO films prepared by e-beam evaporation as a function of the annealing process are studied. 摘要研究了电子束蒸发法制备的氧化镁薄膜在退火处理过程中特性的变化。
- To do anneal process of bearing steel wire rod experiments with the furnace,a set of sphe... 冷拉轴承钢钢丝,无论中间品和成品,不论规格大小和变形量多少,可采用统一的退火工艺。
- Therefor it forms another important basis for determination of annealing process parameters of aluminium foil. 从而为铝箔的退火工艺参数的确定提供了又一重要依据。
- The paper has studied the effect of annealing process on the nano ceramic composites. 研究了退火工艺对纳米陶瓷复合材料力学性能的影响。
- The smaller the production lot and the more advanced heat treatment facility is,the higher the green degree of the normalizing process relative to the annealing process. 其影响因素和结果表明,生产批量愈小、热处理设备愈先进,正火工艺相对于退火工艺的绿色化程度愈高。
- In this paper,molybdenum wires' mechanical properties were studied through adjusting annealing temperature,and by which the optimum annealing process was established. 通过调整退火温度测试不同温度下超细钼丝的力学性能,探讨退火温度对超细钼丝力学性能影响的规律,从而制定钼丝最佳退火工艺。
- The as-deposited high silicon electrical steel was processed using high temperature rapid annealing process. 对电子束物理气相沉积高硅硅钢片进行了高温快速退火处理。
- Fuzzy C-means algorithm is used to cluster the production data in batch annealing process, then the exponent least square algorithm is used to get the relationship between cooling time and weight of clusters. 采用模糊C均值聚类方法对退火生产数据进行处理，再基于得到的聚类数据点进行指数最小二乘回归。
- In view of the higher hardness of high Cr-W white cast iron, a lot of experiments were carried out in relation to softening annealing process, and the microstructure transformation during annealing process was analysed. 摘要针对高铬钨铸铁硬度高这一问题，对其软化退化工艺进行试验，并对高铬钨铸铁退火过程中组织转变进行分析。
- By using Rutherford backscattering spectroscopy, it has been found that the interdiffusion of Mn atoms, responsible for the decrease of TMR during the annealing process, is suppressed across such nano-oxide layer. 通过卢瑟福背散射实验直接观察到产生这一效应的原因是该纳米氧化层有效地抑制了Mn元素在退火过程中的扩散;从而使TMR值在较高的退火温度下得以保持.
- In the process of manufacturing Ni-Cr alloy filmresistances of IC by using magnetronic sputtering,the film resistive property has been found having a regular change after annealing process. 这一现象的发现对我们今后在集成电路镍铬合金薄膜电阻的设计优化方面具有较高的参考意义。
- This article introduces the anneal process,step,main point of50ton convertor,especially for the installation of heating device,operation and temperature control of anneal heat treatment. 介绍50t转炉炉壳的整体退火工艺过程、步骤、要点,着重介绍了加热装置的安装、操作及退火热处理温度的控制。
- We utilized rapid thermal annealing (RTA) and laser induced annealing (LIA) processes to form nickel silicide and discussed the role of amorphous silicon in annealing process. 我们分别利用快速热退火与雷射引致退火形成矽化镍并讨论非晶矽在退火制程中所扮演的角色。
