您要查找的是不是:
- Internal Force Analysis Due to the Supporting Translation in Statically Indeterminate Structures for Different Elastic Modulus 用拉压不同模量理论计算支座移动引起的超静定结构内力
- EFFECT OF FILLETS WITH DIFFERENT ELASTIC MODULUS ON THE STRESS DISTRIBUTION IN ADHESIVELY BONDED ALUMINIUM SINGLE LAP JOINTS 胶瘤弹性模量对铝单搭接接头应力分布的影响
- different elastic moduli of material 不同弹性模量
- different elastic modulus 不同弹性模量
- The static elastic modulus of the alloy is lower than 30 GPa. 合金的静态弹性模量小于30GPa;
- Effect of Fibers with Different Elasticity Modulus on the Properties of High - strength Concrete 不同弹性模量的纤维对高强混凝土力学性能的影响
- The compressive properties of saturated and dry concretes including strength, elastic modulus and peak strain under different loading rates are studied by experiments. 摘要在准静态及中低加载速率下,开展了饱和与干燥混凝土力学性能变化的试验研究。
- EXPANSION OF CYLINDRICAL CAVITIES IN STRAIN-SOFTENING MATERIAL WITH DIFFERENT ELASTIC MODULI IN TENSION AND COMPRESSION 考虑材料的拉压模量不同及应变软化特性的柱形孔扩张问题
- Comparative Study of the Effect on Stress Distribution of Porcelain Laminate Complex with Different Elastic Moduli 不同弹性模量的瓷材料对三型瓷贴面复合体应力影响的比较研究
- Two series of fatigue crack growth rate (FCGR) tests using three point bend specimen with different integral knife edge designs are performed. Effect of elastic modulus on the measurement of fatigue crack length using compliance technique is analyzed. 用不同整体刀口设计的三点弯曲SE(B)试样做了两组疲劳裂纹扩展速率 (FCGR)试验 ,分析了弹性模量在柔度法测量疲劳裂纹长度中的影响。
- The dynamic elastic modulus and damping ratio of normally consolidated soft clay subjected to undrained cyclic triaxial loading are investigated at different initial deviator stresses. 通过对萧山正常固结饱和软黏土进行应力控制的循环三轴试验,着重研究了初始偏应力对动弹模量(土动剪模量)及阻尼比的影响。
- The various types of stress, strain, and elastic modulus are summarized in Table 10-3. 各种应力、应变和弹性模量列于表10-3中。
- The elastic modulus of the loudspeaker cone and rim are different, and thickness of the loudspeaker is thin and non-uniformity, so conventional static measuring method isn't appropriate. 摘要纸质喇叭盆体和盆边的弹性模量是不同的,喇叭整体厚度比较薄且厚度不均等,所以通常的静态测试方法并不合适。
- According to the calculated directional bulk modulus, directional elastic modulus and overlap population, the cause of different anisotropic CTE in these two systems was discussed. 根据方向体弹性模量、方向弹性模量及重叠布居数讨论两种材料各向异性热膨胀不同的原因。
- The larger the elastic modulus, the greater the stress needed for a given strain. 弹性模量越大,产生一定应变所需要的应力也越大。
- The ratio of stress to strain, or the stress per unit strain, is called an elastic modulus of the material. 应力与应变之比,即每单位应变的应力,叫做该材料的弹性模量。
- However, the elastic modulus of SCC is not significantly affected by S/A ratio when total aggregate volume is kept constant. 然而对弹性模数而言,当骨材总体积量一定时,改变混凝土含砂率对于弹性模数并没有太大的影响。
- The equivalent elastic modulus was deduced by comprehensive considering deflection and elastic modulus. 通过综合考虑挠度引起弹性模量和弹性伸长引起弹性模量推导出等效弹性模量。
- In this paper,the effects of the steel fibers of different elastic modules,polypropylene fibers and polyacrylonitrile fibers on the dry shrinkage of concrete are studied. 主要研究了不同弹性模量的钢纤维、聚丙烯纤维和聚丙烯腈纤维混杂对水泥混凝土的干燥收缩性能的影响。
- The effects of fiber distributing orientation and its length on elastic modulus of solidified resin are discussed. 依据复合材料相关理论预测了固化层片及固化零件的机械性能,如弹性模量、强度。