您要查找的是不是:
- cylinder drive belt 脱粒滚筒传送皮带
- Generator drive belt condition and tension. 发电机传动皮带的状况和张力。
- Loose accessory drive belt (water pump slipping). 辅助驱动皮带松脱(水泵打滑)。
- The generator drive belt is loose or worn. 发动机传动皮带松动或腐蚀了。
- Remove serpentine drive belt, refer to Group Cooling. 拆下蛇型驱动皮带,请参阅单元7-冷却。
- Install accessary drive belt (refer to Group 7, Cooling). 安装附属的驱动皮带(请参阅单元7,冷却)。
- Worn main bearing from excessive tension on drive belt. 驱动轮上的轴承因张力过大而损坏。
- Install the serpentine drive belt and tighten to obtain the specified tension. 安装蛇形驱动带,拧紧到规定的张力。
- For belt tension specifications, refer to Specifications-Accessory Drive Belt in this group. 关于皮带张力规格表,请参见本单元的规格表-辅助驱动皮带
- Tighten all compressor mounting bolts, the clutch mounting nut, the clutch coil mounting screw or nut, and the serpentine drive belt to the correct specifications. 扭紧所有的压缩机固定螺栓、离合器固定螺帽、离合器线圈固定螺丝或螺帽和蛇型驱动皮带螺栓至正确规格。
- After analysis of the structure and work principle of hydro cylinder drived weight hammer impactor, a mathematical model was set up. 分析了液压缸驱动重锤式碎石机冲击器的结构及其工作原理,建立了该液压冲击器的数学模型。
- Loosen the accessory drive belt tension and remove the belt from the power steering pump (refer to Group 07, Cooling Systems for proper procedures). 放松辅助驱动皮带,从动力转向泵上拆下皮带(有关程序,请参阅单元07,冷却系统)。
- A water-cooling system consists of the engine water jacket, thermostat, water pump, radiator, radiator cap, fan, fan drive belt and neccessary hoses. 一个完整的水冷系统包括机体水套,节温器,水泵,散热器,散热器罩,风扇,风扇驱动皮带和必需的水管。
- The finite length contact melting of phase change material around a moving horizontal elliptical cylinder driven by temperature difference was investigated. 提出并研究了相变材料围绕水平椭圆柱,在有限长接触时的温差熔化过程。
- Drive belt and change gear to perform stabilized transmission of bottom weft and provide wider range of fabrics which be more superior in quality. 传动皮带使用高扭力时规皮带,齿轮搭配变速,纬底输送稳定,织物领域大且质量优良。
- A clutch engages and disengages the drive belt from the pedal crank, enabling the rider to filter the water while traveling or while stationary. 有一个可以控制在脚踏曲柄轴上传动带的传动器,使骑车的人在骑车移动或者静止的时候过滤水。
- From the angle of realizing the rotating function of container spreaders, the text introduces the scheme of hydraulic oil cylinder driving for the alteration based on the common container spreader. 文章从实现集装箱吊具的旋转这一功能的角度,主要介绍了油缸驱动的传动方案。
- Loosen the accessory drive belt at the power steering pump bracket, if equipped or at the idler pulley bracket (refer to Group 7, Cooling System for the proper procedure). 如果装备且在惰轮皮带盘托架上,放松动力转向泵托架上的附件驱动皮带。
- The article expatiates upon theory of the hydraulic cylinder drived reciprocate bump and their structural features.Gives several forms of construction,and analyses relative merits of their own. 本文阐述了一类液压缸推动的往复泵原理、结构。描述了多种形式及实现原理。分析了各方案的优缺点。
- Can the drive belt that positions the print head be replaced by a mechanically competent owner or is this strictly an Epson task requiring specialized equipment? 网友相关回复如下:(以下网友回复只代表网友个人观点,不代表苏州办公耗材网观点)