您要查找的是不是：
- the form of cycloidal gear tooth; 摆线轮齿形;
- cycloidal gear teeth 摆线轮齿
- cycloid gear tooth 摆线轮齿
- Series of flexible rotor cycloid gear pump from the main rotor, outer rotor teeth, pump body and explosion-proof motors and other components. 主要由内齿转子、外齿转子、泵体和防爆电动机等部件组成。
- To cause(gear teeth) to become engaged. 使（齿轮）相啮合
- Spray or paint grease onto the gear teeth. 将油酯喷或涂到齿轮齿条上。
- The many teeth difference cycloid gear drive now is widely used in the low transmission ratio and big power in kilowatt specifically. 多齿差摆线针齿行星传动近几年来在小速比减速机上，特别是在大功率速比小范畴的使用过程中得到广泛的应用。
- The two teeth difference cycloid gear drive now is widely used in the small speedratio reductor transmission,especially during the heavy_power,transmission,small speedratio. 二齿差摆线针齿行星传动近几年来在小速比减速机上,特别是在大功率速比小范畴的使用过程中得到广泛的应用。
- Exact modeling of gear teeth is based on meshing theory. 摘要根据齿轮啮合原理，建立了轮齿的精确齿形。
- Check ring gear and pinion gear teeth contact pattern. 检查环形齿轮齿接触印痕。
- To improve the transmission accuracy and stiffness of the ball cycloid reducer, the authors developed a novel cycloid ball reducer, which uses a full complement ball as its gear teeth. 为了提高摆线球齿传动的精度和传动刚度,研制了一种新型的摆线球齿传动。
- First,the operating principle of cycloidal gear pump is analyzed in this article. 本文首先分析了摆线油泵的工作原理,并进一步分析了目前采用的齿形的缺点。
- Gear teeth in mesh. 相互啮合的齿轮
- Cycloidal gear pair with small teeth difference 摆线少齿差齿轮副
- The engagement of gear teeth. 啮合齿轮的互相咬合
- Based on the theory of forming cycloidal gear,this paper discusses the basic fundamentals and methods of machining cycloidal gear with cam mechanism. 根据摆线齿轮齿廓的形成理论,探讨利用凸轮机构实现摆线齿轮加工的原理和方法。
- A comparison was made on force bearing conditions of the cycloidal gear with the same typed two pieced gear cycloidal reducer. 并与同种机型两片轮摆线减速机的摆线轮受力进行比较。
- Flexible set cycloid gear pump rotor pump vane pump with the advantages of a similar volume than pump more than 10% efficiency. 柔性摆线转子泵集齿轮泵与叶片泵优点于一身比同类容积泵的效率提高10%25以上。
- The distance between two corresponding points on adjacent screw threads or gear teeth. 螺距两个相对应的点或相邻的螺钉之间的距离
- If possible ,use the same lubricant for the raceway system and the gear teeth as used for initial operation. 如可能，使用与第一次润滑相同的润滑剂来润滑轴承座圈和齿轮齿条。
