您要查找的是不是：
- At last convert the cutter location data into NC code which can be used on the Siemens 802D NC system through post processing. 开发了针对西门子802D数控系统的后置处理器,实现对符合加工精度要求的刀位数据的后置处理,生成NC代码。
- In the last, the process of NC machining is simulated by using the UG software and theCLData (cutter location data) are verified. 最后，用具体算例验证了所选方法的合理性和所得刀位的正确性。
- By compiling the NC program and matching the cutter location data of the twin turrets according to their machining time, the simulation machining driving data were generated. 经对数控程序编译，并经以加工时间为基准的刀具位置数据匹配，生成仿真加工取动数据；
- cutter location data transformation 刀位数据转换
- Pre-processing of Cutter Location Data for Parallel Kinematic Machine Tools 并联机床的刀位文件预处理
- Calculation of Cutter Location Data for Blade NC Belt Grinding in UG Environment 基于UG的叶片数控砂带磨削刀位数据的计算
- Generation of cutter location data and post-processing for parallel kinematic machine tools 并联机床刀位文件生成及后置处理
- cutter location data [计] 刀具位置数据
- Return to the PM data or location data screen. 返回到PM数据或地址数据屏幕。
- The approach includes: obtain cutter location points from cutter contact points; interference pretreatment by convex box of data cloud and reducing check area; interference detection and tool-position correction based on data cloud. 通过计算点云模型的曲率，确定切削步长和行距，采用基于点云的干涉检查模型，推导出干涉处理的解析式，得到了无干涉加工刀轨。
- Return to the PM data or location data screen and save the replacement. 返回到PM数据或地址数据屏幕,保存替换结果。
- This paper presents a cutter location path generation algorithm for 5-axis NC machining of freeform surfaces with torus-shaped endmill. 该方法利用曲面的曲率来确定环形刀的刀具姿态，使得刀具随被加工曲面的形状变化而倾斜，从而生成无干涉的刀位轨迹。
- It introduced imitating surfaces with bicubic parametric curves,feed length,cutter location and vector of cutter location. 介绍用双三次参数曲线拟合曲面、平头铣刀的直径、铣削的步长及行距选择、刀位点和刀轴矢量的计算。
- According to the basic principle of LC oscillator, the cutter contact sensing system and locomotion strategy are designed to realize cutter location automatically. 并根据LC正弦振荡电路基本原理，设计刀具接触传感系统和刀具进给策略，实现对刀具的高精度自动定位。
- The microprocessor uses the address bus to locate data stored in memory. 微处理机使用地址总线设定在存贮器中存贮的数据的地址。
- To satisfy the need of NURBS interpolation,this paper introduces an algorithm of partitioning cutter location points and fitting them with B-spline curves accurately. 为了满足现代NURBS曲线加工的要求,提出了把数控刀位点进行分段并按照用户设定精度进行快速拟合+的一种算法。
- In the initial screen, the PM data screen and the location data screen of the functional location master record. 在初始屏幕、PM数据屏幕和功能位置主记录的地址数据屏幕中。
- A few of cutter location point arithmetics in manufacturing lamb socket mould was studied,and a kind of arithmetic to improve manufacturing quality was found. 对加工假肢接受腔阳模刀位点的不同算法进行研究,并进行了试验验证,最后找出满足加工精度要求的刀位点算法,提高了接受腔阳模的加工质量。
- Select the master record for the piece of equipment in the change mode, and go to the location data screen. 在修改方式下,选择设备的主记录,并进入地址数据屏幕。
- Address Bus:Locates data stores in the memory,input port, or output port. 地址总线：确定数据在存储器，输入口或输出口中的存储位置。
