您要查找的是不是：
- Influence of preheating temperature on curing temperature field and curing state field of tire 预热温度对轮胎硫化温度场及程度场的影响
- Effect of green tire preheating on curing temperature field and curing state field 用有限元法研究胎坯预热对硫化温度及硫化程度场的影响
- curing temperature field 硫化温度场
- Shrinkage stress was found to increase linearly with cure temperature. 我们发现收缩应力随固化温度直线增加。
- Wider range temperature and 3D temperature field distribut... 正反熔宽模拟计算结果与实际的结果吻合。
- Temperature field simulation of CMR bulk target in PLD[J]. 引用该论文 高国棉;陈长乐;王永仓;陈钊;李谭;宋宙模.
- We will now treat some examples of the temperature field in the crust. 现在我们讨论一下地壳温度场的某些例子。
- The above times do not include the time for the workpiece to reach the curing temperature. 上述时间不包括工件加热所需时间。
- As for curing process,the influence of dosage of curing agent and curing temperature on gel time was investigated. 在固化工艺方面,研究了固化剂含量和固化温度对于凝胶时间的影响。
- The true temperature field is approximated by iterations with this formula. 用这个公式进行重复演算，就可以趋近于真正的温度
- The influences of shear ratio,curing temperature and processing technology on the properties of TPE were explored. 实验结果表明:密炼机制备的TPE的力学性能明显优于双辊开炼机,且密炼机的剪切速率越高,TPE的性能越好;
- Key words: Laser remanufacturing; Temperature field; Molten pool; CCD. 关键词：激光再制造；温度场；熔池；ccd。
- Aim To analyse the static temperature field ofthe solid rubber tire(SRT). 分析车辆实心橡胶轮胎稳态温度场。
- Rate of Cure and Final Strength will Depend on the Resistance time at the Cure Temperature. 固化比率及最终固化强度取决于在固化温度条件下所持续的固化时间。
- Study on temperature field of the material heated by monopulse laser[J]. 引用该论文 闫长春;顾济华;吴茂成.
- When curing temperature below glassy temperature of adhesive coating, bonding strength is reduce with curing extent increase. 固化温度低于胶层的玻璃化温度时，粘接强度随着固化程度的提高而降低。
- The paper also studies the effects of some factors such, as additives contont, curing temperature,adherend and storage life on the adhesive property. 文中还对效果较好的体系,进行了添加量、固化温度、被粘材料以及存放时间等因素对粘接性影响的探索。
- By property modification,the phenolic resin will perform special abilities in hydration resistance,oxidation resistance and higher curing temperature. 通过对酚醛树脂的改性,使其具有抗水化性、抗氧化性和高固化温度等特殊性能;
- The researches indicated that the self-made curing agent could decrease the volatile matter of phenolic resin,curing temperature sharply,impro... 该胶黏剂作为中温固化耐高温灌封胶黏剂可以满足航空工业耐高温的技术要求。
- The surface modification of MWNT decreased the curing temperature of the system and improved the adhesion between MWNT,benzoxazine and epoxy. 对MWNT进行了表面改性,降低了苯并恶嗪和环氧树脂固化的温度,增强了MWNT与苯并恶嗪/环氧树脂基体间的结合力。
