您要查找的是不是：
- cross roll straightening machine 斜辊矫直机
- cross roll straightener 斜辊矫直机
- This paper presents a method for roll shape parameters design of roll in tow roll straightener. 从研究矫直原理入手,借鉴国内外先进的技术经验,设计了二辊矫直机。
- This paper presents a formula on calculating the conves roll-shape surface of a two roll straightener which meets this requirement. 提出了满足此要求的二辊矫直机的凸辊辊形曲面的计算公式。
- Some problems about the construction, parameter determination and roll profile design of the short thin-walled tube skew roll straightener are discussed in this paper. 本文讨论了薄壁短管斜辊矫直机结构、参数确定和辊形设计中的几个问题。
- A new algorithm for roll profile curve of straightener with cross rolls 斜辊矫直机辊型曲线的一种新算法
- Keywords straightener with cross rolls;roll profile curve;joggling principle; 斜辊矫直机;辊型曲线;啮合原理;
- Research of the Power Parameters Design in Two Roll Straightener 二辊矫直机力能参数研究
- AZ31 magnesium alloy sheet with good shape and formability is fabricated by warm cross rolling. 通过温热交叉轧制工艺制备了板形以及成形性能良好的AZ31镁合金薄板;
- Cross roll piercing elongation mill, CPE 斜轧穿孔延伸机
- Keywords Roll straightener Gear distribution box Stress analysis; 辊式矫直机;减速分配箱;受力分析;
- The repeated low|energy impact fatigue resistance and abrasiveness of cross rolled 1.85%C | 5.86%Cr medium chromium semi steel have been studied. 通过落球和冲击磨损试验 ;研究了斜轧 1.;85%25C、5
- By the experiment and theory analysis,impressing-picture grid method is appro-priate and accurate to meaure surface deformation in cross rolling p... 在管材与棒材表面质量控制日益要求提高的今天，分析表面螺纹及缺陷的变形机理势在必行。
- To meet the requirement of high speed and presicion in straightening a steel tube or bar, a two roll straightener must be in full contact with the steel tube of bar when they are straightened. 摘要为满足高速、高精度地矫直棒、管材的要求，二棍矫直机在矫直棒、管材时，棒、管材与矫直辊应全部接触。
- The metal fluidity in deformed rigion was stutied by comparing commen rolling with cross rolling and experied with two-high cold rolling mill. 对常规轧制和交叉轧制时变形区金属流动特性进行了理论分析，并在二辊冷轧机上进行了试验。
- The metal fluidity in deformed rigion was stutied by comparing commen rolling with cross rolling and experied with two high cold rolling mill. 对常规轧制和交叉轧制时变形区金属流动特性进行了理论分析,并在二辊冷轧机上进行了试验。
- Abstract The FEM simulation software of DEFORM was used to simulate the temperature distribution of plug for Diese piercer during cross rolling. 摘要 应用DEFORM三维有限元数值模拟软件对狄舍尔穿孔机热轧穿孔过程中的顶头进行了温度场数值模拟，通过模拟和实测分析了顶头开裂、粘钢、塌鼻等失效原因。
- Chock the barrel up or else it will roll over. 用楔子塞住圆桶,不然它会滚过去。
- Research of the roll shape parameters design in tow roll straightener 二辊矫直机辊形参数设计
- ASSEL pipe mill, which adapts technology of the three-roll cross rolling in pipe making, is the main equipment used in the hollow pipe elongating rolling. 阿塞尔轧管机是采用钢管生产中的三辊斜轧工艺,对穿孔后的空心管坯进行延伸轧制的主要设备。
