您要查找的是不是：
- crank shaft bearing 曲轴轴承
- Every bike has a serial number near the crank shaft. 每辆自行车在曲柄轴附近都有一个序列号。
- Aligning main engine's crank shaft and intermediate shaft after launching. 下水后主机曲轴和中间轴连接后校中。
- Measuring deflection of crank shaft of M.E. before starting up(after sea trial). 主机动车前（航行试验后）曲轴甩档测量。
- Calculation and field test show that,by using this auxiliary balancing device, both the peak value and the fluctuation of the crank shaft to... 理论计算及现场试验结果表明，该平衡装置具有降低曲柄轴扭矩峰值、减少曲柄轴扭矩波动及降低抽油机耗电等优点。
- The characters of the electric drive of crank shaft press were studied from the viewpoint of the press working behavior. 从曲柄压力机的工作性质出发,分析了其电力拖动的特点以及电机功率的选择问题。
- The authors analyze the motion law of the balancing mechanism,the forces on the counterbalance and the torque on the gearreducer crank shaft. 还对平衡机构的运动规律、平衡块受力及减速箱曲柄轴扭矩等进行了分析。
- It theoretically and practically summarizes the gist of emergency repair of tunnel shaft bearing of ships. 从理论和实践两个方面概括了应急修理中间轴承的要点。
- Ascertain the first bolt of the M/E aft end and the position of the intermedial shaft bearing. 初定主机末端第一颗地脚螺孔位置，初定中间轴承位置。
- The warp ends are drawn through heddle eyes in the correct manner and in the turning-over of the crank shaft of the loom, a shed is formed with each turn. 经纱以一定的方式被穿在综丝眼中，通过织机开口机构的驱动上下运动，形成梭口。
- Crank shaft,the severe material test will make it hardness and durance. a illtle bit vibration when circulation after balance spindles correction to prolong mechanical life. 曲轴经严格材料测试，坚固且耐用，平衡鎚经精密校正，运转时，震动小。
- The structure of the main shaft bearing assembly can decide its using conditions. 主轴轴承的结构形式又决定了螺杆钻具的使用条件。
- The former causes forced vibration at the circular frequency of the crank shaft and the latter causes transient vibration at the natural frequency of the press. 惯性力激发的振动是以曲轴转速为频率的强迫振动，加工力激发的是以压机固有频率为频率的过渡振动。
- This was why the tail shaft bearing, etc. worn more seriously and the white metal thereon melted and badly scored. 这就是尾轴轴承等更加严重磨损，其上面的白合金熔化和严重拉痕的原因。
- By the analysis of several gas forces in the twin-scroll compressor, the calculation formula of working volume and all different crank shaft angle are derived. 分析了双头涡旋齿涡旋盘所受的各种气体力，提出了在任意曲轴转角下的各种气体力及工作腔容积的计算公式。
- This article has engaged in physical and chemical experiments and analyses of outward appear-nace and microcosmic for nodular cast iron crank shaft of big powerful diesel engine. 对大功率柴油机球墨铸铁曲轴进行了宏观、微观全面的理化检验及分析;
- Install axle shaft bearing with Installer 6436 and Handle C–417Ensure part number on the bearing is against the installer. 用安装工具6436和手柄C–4171安装车轴轴承。确保轴承上的零件号对着安装工具。
- Install axle shaft bearing with Installer 6436 and Handle C–417Ensure that the part number on the bearing is against the installer. 用安装工具6436和柄C–4171安装主动轴轴承。要保证轴承部件号码对着安装工具。
- Based on researching the shaft bearing replacer, this paper built the models of electromagnetic field and vortex density in bearing race snap being induction heating. 摘要在研究轴承内环感应拆装的基础上，建立了感应加热过程中工件内电磁场和涡流分布的基本方程。
- Based on researching the shaft bearing replacer,this paper built the models of electromagnetic field and vortex density in bearing race snap being induction heating. 在研究轴承内环感应拆装的基础上,建立了感应加热过程中工件内电磁场和涡流分布的基本方程。
