您要查找的是不是：
- crack growth angle 裂纹扩展角
- In the tie girder boxes crack growth was detected near the crack tip. 在系杆箱型梁中裂纹尖端附近检测到裂纹的扩展。
- The flaking do increases and undulates the fatigue crack growth rate. 钢中的白点能增加疲劳扩展速率并使扩展速率发生波动。
- Many studies in the related area of stress corrosion or subcritical crack growth use simplified test systems. 许多有关应力腐蚀或亚临界裂纹发展领域的研究使用了简化的试验系统。
- The analytical investigation of nonlinear creep crack growth is in its infancy and much remains to be learned and done. 对于蠕变裂纹扩展的分析研究还是处于初期阶段，还有许多事情有待于认识和完成。
- This is because the R&D factoru fr afirman beciewed in two different anglesn One is the growth angle and thel other is the intangible asset wangle. 这是因为公司的研发因素可以从两个方面来看。即增长面与无形资产面。
- N. Shlyannikov, Z.B. Kuang, F.P. Yang (2004), Surface fatigue crack growth behavior, Russian journal Power Engineering Problems. 杨凤鹏，林卓英(2004)，表面裂纹疲劳扩展的试验，北京科技大学学报.
- This is becausejthe R&D factor of a firm can be viewed instwo different angles. One is the growth angle and theother is the intangible asset wangle. 这是因为公司的研发因素可以从两个方面来看。即增长面与无形资产面。
- The fatigue crack growth rate (FCGR) of 4130X steel in H2S environment is researched in this paper. 研究了4130X钢在硫化氢(H2S)腐蚀介质中的疲劳裂纹扩展速率da/dN。
- This is because the&D factor of a_irm cani be viewed in two different angles. One is the growth angle and the otheris the intangible assetngle. 这是因为公司的研发因素可以从两个方面来看。即增长面与无形资产面。
- In this paper, ALGOL computer program of data reduction techniques, for fatigue crack growth test is described. 本文叙述了疲劳裂纹扩展速率试验数据处理的ALGOL计算程序。
- SEM and Microzone Phase Structure Analysis (MPSA) help to describe the process of fatigue crack growth of the steel. 用SEM和微区相结构测试技术分析了中锰铸钢在疲劳裂纹扩展过程中的行为特点。
- The fatigue striations were readily observed in stable crack growth regions for both aluminum alloys. 另外，从两款铝-镁合金在裂缝延伸的过程中，发现会有因为裂缝延伸产生裂缝尖端塑性钝化而形成疲劳纹路。
- The fatigue crack growth rate is the core for predicting fatigue life by use of fatigue crack propagation(FCP) theory. 疲劳裂纹扩展率表达式是采用疲劳裂纹扩展理论预报疲劳寿命的核心。
- G .C .Sih，Mixed Mode Fatigue Crack Growth Prediction.Frac .Mech，Vol.13(3)，439-451，(1980). 肖芳淳:复合型塑性区尺寸因子断裂判据，力学与实践，第一期，1981年。
- Fleck, N.A., “Influence of Stress State on Crack Growth Retardaion,” ASTM STP 924, Vol. 1, pp.157-183, 1988. 谢游麟，2003年3月，穿透式裂缝与表面裂缝修补之研究，国防中正理工学院，博士论文，第92页。
- The fatigue crack growth experiments were performed according to the phenomena that crack occurred at PMMA in use. 根据外场使用中出现的裂纹现象，进行了疲劳裂纹扩展试验。
- The subcritical crack growth mechanism in brittle materials is studied from the viewpoint of mesomechanics. 本文从细观力学角度研究了高脆性材料亚临界裂纹扩展机制。
- In certifying that a given crack shape will exemplify leakbefore-break behavior, one should consider the effect of crack growth on the applied stresses. 在证实一个给定的袭纹形状将会发生裂前泄露情况时，我们应考虑裂纹扩展对外载的影响。
- Both of these statements are based on the tacit assumption that the applied stress does not change during the crack growth process. 这些结论都建立在理想的假设上，即外载在裂纹扩展过程中不变。
