您要查找的是不是：
- Naphthenic acid corrosion at high temperature has been an old enemy in oil refining industry, and also one of the problems desiderate to be solved. 摘要高温环烷酸腐蚀是世界炼油工业的宿敌，也是目前亟待解决的难题之一。
- According to experiment results, measures to prevent such corrosion failure have been suggested. The main measure to control the naphthenic acid corrosion at high temperature spots is the selection of appropriate corrosion resistant materials. 并结合分析结果 ,提出了控制环烷酸腐蚀主要应选择耐环烷酸腐蚀的材料等措施。
- sulfur corrosion at high temperature 高温硫腐蚀
- Characteristics of Chlorine Corrosion at High Temperature 高温氯腐蚀的特点
- Glass melts at high temperature. 玻璃在高温下熔化。
- The stellite alloys are hard alloys which can resist various wear, corrosion and oxidation at high temperature. 司太立合金是一种能耐各种类型磨损和腐蚀以及高温氧化的硬质合金。
- The ceramic surface has the capacity of high hardness, wear resistance, corrosion resistance and oxidization resistance at high temperature. 该陶瓷层具有高硬度、高耐磨性、高耐蚀性和高抗高温氧化性能。
- The effect of long term exposure at high temperature on structure stability of a hot corrosion resistance Ni-bace alloy with high chromium content is investigated. 本工作系统地研究长期高温时效对高铬含量的Ni-基耐热腐蚀合金组织稳定性的影响。
- Excellent insulation at high temperature, long service life. 优良的高温约缘性能、使用寿命长；
- Vinified at high temperature to extract colours and aromas. 在高温下酿制以汲取色泽和果香。
- High resilience and low shrinkage at high temperature. 高温状态下纤维回弹强，收缩小；
- corrosion at high temperature [化] 高温腐蚀
- Combustion at high temperature causes decomposition to nitrogen and water. 氨在高温下燃烧分解成为氮和水。
- Hard as the metal is,it can be changed into liquid at high temperature. 金属虽然很硬，但在高温下可以变成液体。
- Titanium is strong enough to withstand heavy loads at high temperature. 钛有足够的强度，在高温下经得起负荷。
- Suitable folr felalspar glazes, reductive firing at high temperature. 适合长石釉,高温还原烧成。
- Hard as the metal is, it can be changed into liquid at high temperature. 金属虽然很硬,但在高温下可以变成液体。
- The main difficulty was failure of refractories at high temperature. 其主要的困难是高温下耐火材料的损坏。
- It was found that the inappropriate selection of materials as well as the inadvisable structure design and the inapposite welding caused the naphthenic acid corrosion at high temperat... 并结合分析结果,提出了控制环烷酸腐蚀主要应选择耐环烷酸腐蚀的材料等措施。
- The Y zeolite is calcinated at high temperature after fluoride modified. 摘要 采用氟处理结合高温焙烧的方法对Y型分子筛进行改性。
