您要查找的是不是：
- It was indicated that the corona discharge treatment was necessary in some applied field of polyester film. 讨论了聚酯薄膜电晕处理及其应用的关系，指出在一些应用范围电晕处理的必要性。
- The effect of corona discharge treatment on the structure and properties of polymer materials as well as the surface graft modification by corona discharge were briefly introduced. 叙述了电火花处理对高分子材料表面结构与性能,以及处理条件对改性效果的影响,电火花引发高分子材料表面接枝改性的新方法。
- Surface properties of wool fabrics affected by corona discharge treatment 电晕处理对毛织物表面性能的影响
- Effect of Corona Discharge Treatment on Surface property of wool fabric 电晕放电对毛织物表面性能的影响
- Keywords PET;polyester;film base;subbing;corona discharge treatment; PET（聚对苯二甲酸乙二醇酯）;聚酯;片基;底层;电晕放电处理;
- corona discharge treatment 电晕放电处理
- A faint glow enveloping the high-field electrode in a corona discharge, often accompanied by streamers directed toward the low-field electrode. 电晕在电晕放电中在高压电极出现的一种微弱光辉，常伴随有朝向低压电极的电流
- Non-equilibrium plasma engendered by DC corona discharge was utilized for discomposing toluene. 利用直流高压电晕产生的非平衡等离子体分解甲苯。
- Pulse corona discharge is one of the methods which producing plasma is in industrial test stage. 脉冲电晕放电是产生等离子体的方法之一，目前已达到工业性试验阶段。
- Parameters such as voltage,times of corona discharge and regain have effect to the anti-felting property of wool. 电晕放电可以提高羊毛织物的防毡缩性能,影响防缩处理的电晕工艺参数有电压、电晕遍数、回潮率等因素。
- This indicated that to remove the NOX, which is the production of corona discharge, by wet desulfurization system is feasible. Ca(OH)_2溶液对NO_2的吸收比较充分，因此，以传统湿法(半干法)烟气脱硫系统作为电晕放电氧化氮氧化物所产生的氧化产物的吸收系统是可行的。
- The results show that with corona discharge and copolymerizaion time, the grafting degree of AAM onto BOPP film increases. 结果表明;电火花能有效地引发AAM在BOPP薄膜表面的接枝聚合反应;随着电火花处理时间和接枝反应时间的延长;AAM在BOPP薄膜表面的接枝率增大.
- Three precipitation static discharge modes are introduced,which are sparkover and arc,streamering discharge and corona discharge. 介绍了沉积静电的3种放电形式:跳火花和电弧、表面流光放电、电晕放电;
- The surface structural properties of DMF pretreated PET fabric treated by corona discharge are studied through XPS, ATR-FTIR. 利用XPS、ATR-FTIR等手段来研究DMF预溶胀涤纶经电晕放电处理后的表面结构性能。
- On the basis of calculated results, the experiment was carried out to remove NO by propane and propene with pulse corona discharge and amonia. 根据计算结果，以丙烷和丙烯为例，利用脉冲电晕加氨分别与丙烷和丙烯协同进行了脱除NO的实验研究，得出了最佳工艺参数。
- Three precipitation static discharge modes are introduced, which are sparkover and arc, streamering discharge and corona discharge. 介绍了沉积静电的3种放电形式：跳火花和电弧、表面流光放电、电晕放电；
- The scale-up experiments of the decomposition of toluene by pulse corona discharge in wire-plate reactor were investigated. 应用脉冲放电等离子体技术,在线板式反应器内对低浓度甲苯废气的治理进行放大试验。
- The results show that the adhesion strength of UHSPE fiber/epoxy resin can be greatly improved via corona discharge su... 结果表明,经电晕法表面处理后的UHSPE纤维单丝与环氧树脂的界面粘结强度有了很大的提高。
- This paper analyzes the trait of corona discharge by experiments,and then points out that the force of the Lifter is come from the vortex s dynamics. 本文通过实验研究,分析电晕放电的特点,提出基于涡旋动力学理论的挠场与真空零点能相干原理来解释推力的产生。
- The ozone generator was designed by corona discharge technology.The source gas for generating ozone was air or oxygen gas. 以空气或氧气为气源,采用电晕放电技术,设计了一种由臭氧管、高频电源、风机和控制系统组成臭氧发生器。
