您要查找的是不是:
- Has a cool sports car; had a cool time at the party. 拥有一流的跑车; 在晚会上玩得好极了
- Here, cooling time is defined as holding time. 在这里,冷却时间定义为保压时间。
- I had a really cool time last night at your party. 昨晚在你的聚会上,我玩得很尽兴。
- The Kelvin cooling time for the Earth is then about 30,000 years. 在开尔文的冷却时间,地球是那么大约3.;0万年。
- Upgrade weapons speed and attack skills should not shorten the cooling time. 提升武器速度,并不能缩短攻击技能的冷却时间。
- Cooling time dominates cycle time in thick-wall moulding like preform moulding. 属厚壁注塑的瓶坯,冷却时间支配着周期时间。
- Practical application shows that the method can achieve more correct cooling time prediction of annealing furnace and meet the need of worksite. 现场应用表明,该方法能够较为准确地实现退火炉冷却时间预报,满足了现场要求。
- The wall thickness of a 1-litre bottle preform is 3mm. The cooling time is 10.8s. 1公升的矿泉水瓶瓶坯壁厚3mm,冷却时间便占10.;8秒。
- The wall thickness of a 5-gallon bottle preform is 8mm. The cooling time is 76.8s. 5加仑瓶瓶坯壁厚8mm,冷却时间是76.;8秒。
- The efficiency of making preforms, which belong to the thick-wall domain, is highly dependent on cooling time. 属厚壁注塑的瓶坯注塑生产效率受冷却时间支配。
- The plateau age of 415.1 Ma obtained in Chencai,Zhuji represents the cooling time of the main metamorphic event. 其中在诸暨陈蔡测得的415.;1Ma的坪年龄代表了主变质晚期的冷却年代。
- Increase in cooling time is proportional to the square of the increase in thickness. 冷却时间增加同厚度增加的平方成正比。
- Cooling time dominates cycle time in thick-wall moulding like preform moulding . 属厚壁注塑的瓶坯,冷却时间支配着周期时间。
- The ordinary plastic(HDPE) pipe is of poor heat conductivity, which prolongs the cooling time though it costs less. 普通塑料(HDPE)管虽然成本低,但是导热性能差,延长了冷却时间。
- Cooling time is proportional to the square of wall thickness, but inversely proportional to mould temperature difference. 冷却时间正比于壁厚的平方,但反比于模温温差。
- Air blow function and cooling fuction from mould of lower die can short the cooling time , improve the quality og products . 具有上下模吹气功能及上下模冷却功能,缩短冷却时间,提高产品质量。
- The cooling time of YAG medium is less than that of GGG medium at the same volume and the same initial temperture field. 对于相同体积、相同初始温度场的YAG介质和GGG介质,YAG介质的冷却时间少于GGG介质的冷却时间。
- The main cause of low impact toughness is that following the long cooling time, the structure becomes coarsing and appears corse-grained twin-mastensite. 冷却时间长,显微组织粗化,出现粗大孪晶马氏体,这是影响韧性低的主要原因。
- The results showed that the cool time, iron temperature, bind temperature and bonded fabrics had influences on the heat shrinkage rate of wool fabric. 结果显示,熨烫冷却后的放置时间、熨烫温度、熨烫黏合温度及黏合衬的种类均会影响到毛织物的热缩率。
- Fruit juices ferment if they are kept a long time. 果汁若是放置很久,就会发酵。