您要查找的是不是：
- Because it is difficult to control rolling process of molybdenum sheet,there is much defective material and low rate of finished products. 当前钼板轧制工艺过程难以控制,轧废现象严重、成材率低下,寻求适宜的加工工艺势在必行。
- This paper introduced the process flow and application effect of IRQ controlled rolling method insteading of conventional controlled rolling process in Angang steckel mill production line. 介绍了安钢炉卷轧机生产线开发、应用IRQ控轧工艺替代传统控轧生产工艺的工艺流程及实施效果。
- Control rolling and cold rolling process 控轧及控冷工艺
- REVIEW OF CONTROL ROLLING PROCESS FOR HEAVY PLATE MILL 厚板轧机控制技术综述
- STUDY ON CONTROLLED ROLLING PROCESSING OF HIGH TOUGHNESS PIPE STEEL 高韧性管线钢的控制轧制工艺研究
- Controlled Rolling Process for Plain C-Mn Steel Plate with Ultra-fine Grained Ferrite 普通碳锰钢的超细晶板材控轧工艺研究
- Development and Application of Controlled Rolling Process and Equipment for Low Alloy Steel Rod 低合金钢棒材控轧工艺及设备的开发与应用
- EFFECTS OF CONTROLLED ROLLING PROCESS ON MECHANICAL PROPERTIES AND MICROSTRUCTURE OF 16MnR STEEL MICRO-ALLOYED WITH Ti 控制轧制工艺对含微量钛16MnR钢力学性能和显微组织的影响
- Optimization Calculation of Control Temperature in Plate Control Rolling Process 中厚板控制轧制过程控温温度的优化计算
- Optimization method of holding gauge on plate temperature control rolling process 中厚板控制轧制过程控温厚度的优化计算
- INTER-CRITICAL AUSTENITE CONTROL ROLLING PROCESS FOR ULTRA-FINE GRAIN STRUCTURE OF PLAIN CARBON STEEL 普通碳素钢超细晶临界奥氏体控轧工艺研究
- The influence of controlled rolling process on the microstructure and properties of vanadium micro-alloyed low-carbon steel plate 控制轧制对含钒低碳钢板组织与性能的影响
- controlled rolling processes 控制轧制
- Effect of Controlled Rolling Processing on Micro Structures and Properties in HSLA Steel 控轧控冷工艺对低合金钢显微组织和力学性能的影响
- The mathematical model of wire cool controlled rolling based on the analysis of thermal process of billet after being discharged is established. 在详细分析钢坯出炉后热过程特点的基础上,建立了线材控冷轧制热过程数学模型。
- The system pressure had very big fluctuation during rolling process. 在轧钢过程中系统压力出现大幅度波动。
- On the basis of the production process of controlled cooling and controlled rolling, a prediction model of recrystallized grain size of austenite was established. 摘要基于钢板的控轧控冷生产过程，建立了奥氏体再结晶过程中晶粒尺寸的预测模型，该模型的计算结果与实测值基本相符，这为随后的相变行为提供了较准确的初始条件。
- Resistance to deformation and friction coefficient are important parameters for the setting up of control model of continuous rolling process. 摘要变形抗力和摩擦系数是用于设定轧制过程控制模型的重要工艺参数。
- Abstract: The artificial intelligence method to setup and control rolling force is researched. 文摘:研究了轧制力设定控制的人工智能实现方法。
- The plate multipass rolling process with plane pattern control was analyzed with updated geometry method on the platform software LS-DYNA. 采用显式动力学弹塑性有限元方法和几何模型更新技术,对中厚板轧制过程中平面形状控制道次进行了模拟。
