您要查找的是不是:
- control valve piston rod 控制阀活塞杆
- by-pass valve piston rod 旁通阀活塞杆
- Electrohydraulic push rod drives the two-way pump to output pressure oil with rotation of motor clockwise and counter-clockwise, by control of hydraulic valve, send to the hydraulic cylinder, to achieve the reciprocating movement of the piston rod. 电液推杆以电动机正反转,带动双向泵输出压力油,经液压阀控制,送至液压缸,实现活塞杆的往复运动。
- Put forward the new structure ibstead of valve in hydraulic reversing, keeping the hydraulic oil dean so the control of hydraulic system is pricise, and the wear of piston rod is reduced greatly. 提出液压换向使用“油口控制”取代“阀控制”的新思路,使系统控制及时、准确,充分利用油缸的空间,避免不必要的损坏。
- Worn crankcase piston rod seals O-rings on. 曲轴箱柱塞连杆O型圈磨损或柱塞衬套磨损。
- hand control valve piston 手控制阀活塞
- Worn crankcase piston rod seals. 曲轴箱连杆密封件损坏。
- Replace crankcase piston rod seals. Replace O-rings. 更换新的曲轴箱柱塞连杆O型圈。
- In all designs, the valve stem normally serves as a piston rod with disc fastened directly to them. 在所有结构中,阀杆通常作为活塞杆,阀瓣直接固定在阀杆上。
- Wuxi ChengXin Auto Control Valve Co., Ltd. 无锡市诚信自控阀门有限公司。
- Rethink your control valve maintenance. 采用新的诊断工具提高控制阀维修的可靠性。
- When assembling, leave the mark on body of piston rod frontward. 装配时,杆身上的记号要朝前。
- Th e piston rod should befitted with the crosshead arenow going tryit. 活塞杆应与十字头孔配合。
- A Graphical Method for compensation of control Valve Performance. 控制阀特性补偿的图解方法。
- Control valve in an air system for setting volume and pressure. 为了保持流量和压力的空气系统的控制阀门。
- A beam that connects the piston rod to the connecting rod of a reciprocating engine. 十字头连接活塞杆和往复式发动机连杆的横杆
- Ability of extension for remote control or flow control valve. 可扩充发展成远程控制,或流量控制设备。
- Manifolds can be added to a control valve sealing device. 可以给阀组加一个阀的密封控制装置。
- As the piston descended, a ratchet engaged the piston rod and engine shaft and thus power was transmitted. 当活塞下行时,棘轮连接活塞杆和发动机轴,因此将功率输送出去。
- Remove the cover and diaphragm. The relief valve piston assembly can be lifted straight up and out. 拆卸阀盖和隔膜。安全阀活塞总成可以笔直提出到外面来。