您要查找的是不是:
- control limit switch 控制极限开关,极限控制开关
- To check the limit switch during the test. 在试验中检查限位开关。
- Where is the limit switch located? 这个限位开关装在什么地方?
- NCL: No control limit is allowed. 不允许超出控制界限。
- NCL:No control limit is allowed. 不允许超出控制界限.
- NCL:No control limit is allowed. 不允许超出控制界限。
- Oth lifeboat davits seriously corroded, Stbd. Davit limit switch seized. 救生艇吊艇柱严重锈蚀,限位器卡死。
- Adjust the limiting switch of the appliance. 电器限位调整。
- The limiting switch of the appliance doesn't work. 电器限位不好。
- Both lifeboat davits seriously corroded, Stbd. davit limit switch seized. 救生艇吊艇柱严重锈蚀,限位器卡死。
- The ARU-M type has a limit switch and can check the operation by monitoring. 如果任何一个管道受阻,分销商是行不通的。
- Secondary protection shall be a pin expulsion type element complete with mechanically operated limit switch. 我想应该是:二级保护是一个连同机械的可操控限极开关的安全针排气类型的元件。
- Frequency control limits the number of stations you can tune into. 频率控制限制了你们能调谐进的台站数量。
- Variation beyond a control limit is evidence that assignable causes are affecting the process. 管制界线是从制程的资料来计算,不要和规格界线混淆。
- The limiting switch of the appliance is not synchronous. 电器限位不同步。
- A control chart usually displays a lower control limit (LCL) and an upper control limit (UCL). 注 : 一般而言 , UCL与 LCL 的位置为平均值的正负三个标准差。
- Position indicator with NAMUR is convenient for mounting accessories such as Limit Switch box,Positioner and so on. NAMUR标准指示器便于安装位置开关、定位器等附件。
- This includes computing and interpreting capability indices, estimating the% failures, control limit calculations, etc. 包括计算和解释过程能力指数、计故障百分率、制限计算等。
- There is no industry control limits for Copper and Lead in SnAgCu solder pot. 目前行业中没有用于SnAgCu焊料槽中铜和铅的控制极限。
- If the cage is liftedover the limit switch cam or lose the power suddenly, the cage can be pried up and down by hand. 当吊笼越过限位开关触发板或突然失电时,可对吊笼进行手工撬动升降。