您要查找的是不是:
- A novel method based on modified particle swarm optimization (IPSO) with mutation algorithm was proposed to optimize water quantity in secondary cooling process in the continuous slab casting. 提出了一种基于带有变异算子的改进粒子群算法对二冷区水量进行优化的新方法。
- Electric system analysis of continuous slab casting machine 板坯连铸机电气系统分析
- Keywords continuous slab casting;solidifying thickness;numerical simulation; 板坯连铸;凝固壳厚度;数值计算;
- Simulation of Solidification Process in Continuous Slab Casting Based on Time-space Finite Volume Method 基于时空有限体积法的板坯凝固过程仿真
- Fluid Flow and Solute Distribution at Solidification End During Soft Reduction of Continuous Slab Casting 板坯凝固末端轻压下流动与溶质分布的研究
- Analysis of arc -shaping techniques for segment of continuous slab casting machine 板坯连铸机扇形段几种对弧方法分析
- LATTICE BOLTZMANN METHOD SIMULATION OF FLUID FLOW INSIDE CONTINUOUS SLAB CASTING MOLD 板坯连铸结晶器流场的格子法模拟
- The Finite Volume Method to Dynamic Control Model of sceondary cooling for heat-transfer in Continuous Slab Casting 板坯传热二冷动态控制模型的有限体积法
- continuous slab casting 板坯连铸
- There were some problems of sculls and strikealarm in mold for wide slab casting in Nan Steel,which influence on continuous casting process. 南京钢铁有限公司宽板坯在浇注过程中常出现结晶器钢液结壳和粘结报警的问题,严重影响了连铸生产的顺行。
- Abstract : The research on mould technology for thin slab casting at TISCO was introduced. 文 摘: 介绍了唐钢关于薄板坯连铸用结晶器技术的研究工作。
- Abstract : Research and development of mould powder for low carbon steel thin slab casting specially used in cold rolling at TISCO is introduced. 文 摘: :介绍了唐钢薄板坯连铸低碳冷轧用钢保护渣的研究开发过程。
- Split rolling method which produces H beams is a new method of rolling from continuous slab. 劈分轧制法是用连铸板坯生产H型钢的一种新型轧制方式。
- The drawability have not change more difference for thin slab casting compare with thick slab casting, although reduction is less to thin slab casting. 连铸薄板坯与厚板坯相比总压下率小,但是通过实验得到连铸薄板坯在铁素体区热轧时的深冲性能与使用常规的厚板坯相比,没有明显的变化。
- New structures as rigid frame continuous slab and continuous steel box girder are used for viaduct from Shangzhi Street to Haicheng Street of Harbin. 哈尔滨尚志大街至海城街高架桥采用刚构连续板及连续钢箱梁等新型结构形式,结合设计情况,介绍其结构特点、设计要点、技术指标,并对施工问题进行探讨。
- Study on Nitrides in Cold Rolling-Oriented Al-Killed LC Steel From CSP of HanSteel[A]Proceedings of 2006 International Symposium on Thin Slab Casting and Rolling[C], 2006 . 吝章国;王习东;张文.;邯钢CSP冷轧用低碳钢中氮化物的研究[A]2006年薄板坯连铸连轧国际研讨会论文集[C];2006
- The equipment, control system, technical requirements, operation mode and product quality of thin slab casting with liquid core reduction (LCR) are introduced. 就薄板坯连铸带液芯轻压下过程的设备条件、控制系统、工艺要求、生产操作方式、铸坯的质量等做了简要的概述。
- The failure probability of the continuous slab is the sum of the product of load-appearance probability and the failure probability under the action of the corresponding load. 连续板的失效概率应为荷载出现概率和相应荷载作用下的失效概率乘积的总和。
- The paper describes the control function features application software and PLC network of "EIC" control system for 1350mm continuous slab caster in Jiuquan Iron & Steel Company. 介绍了酒钢1350mm板坯连铸机“三电”控制系统的功能特点,应用软件和PLC网络。
- It is easy to cause longitudinal cracks in and depressions on slab cast with high(overheat) and strong secondary cooling. 浇铸亚包晶钢时钢水过热度高,在较强的冷却制度下会促进铸坯表面形成凹陷和纵裂。