您要查找的是不是:
- The result showed that PABMI made the heat resistance of thermosets increased obviously With the content of epoxy resin in... 结果表明,PABMI使环氧树脂耐热性明显提高,随着环氧树脂比例增加,固化加快,粘结性增大,耐热性降低,建议了不同耐热等级时的原料比例。
- The crystallinity reach its peak when the content of epoxy is 1%, with the increase of epoxy resin content, the crystallinity of nylon 11 alloy decreases. 环氧树脂用量为1%25时,尼龙11共混合金体系的结晶度最大,此后随着环氧树脂的加入,尼龙11结晶度随之降低。
- Effects of the addition method, the content and variety of epoxy resin, NCO/OH ratio, the content of DMPA was studied on viscosity and rheology of emulsion, water-resistance, adhesive strength and tensile strength. 环氧树脂种类、添加量、NCO/OH摩尔比以及DMMP含量对乳液粘度及流变性能、耐水性、粘接强度和机械强度的影响。
- Tough and chemical resistance of epoxy resin. 具有环氧树脂的坚硬性耐化学品性。
- content of epoxy resin 环氧树脂用量
- The effect of epoxy resin and zinc oxide content on the mechanical properties of flame retarded HIPS modified by phosphorus-containing compound was studied. 研究环氧树脂(EP)和氧化锌用量对含磷化合物阻燃高抗冲聚苯乙烯(HIPS)力学性能的影响。
- New process on phosphorus curing agents of epoxy resin are reviewed. 摘要综述了含磷环氧树脂固化剂研究的新进展。
- This article studied the properties of epoxy resin modified with oleic acid. 研究了油酸对环氧树脂酸酐固化物性能的影响。
- The effects of various reaction time, reaction temperature and content of amino group of polysiloxane fluid were investigated.The modified epoxy resin was analyzed by TGA. 研究了不同反应时间、不同反应温度以及不同氨基硅油含量对改性环氧树脂性能的影响,用热重法对改性树脂的耐热性进行了表征。
- A series of waterborne curing agents with different phosphorus content are synthesized by capping the adduct of epoxy resin and diethylenetriamine with diphenyl chlorophosphate(DPCP) and monoepoxide. 采用环氧树脂与二乙烯三胺反应生成端胺基环氧-胺加成物,再经氯磷酸二苯酯(DPCP)与单环氧化合物封端和成盐,合成了一系列不同磷含量的新型水性环氧自乳化固化剂。
- The results show that the content of polar group and the specific surface area increase so as to improve the wettability between the aramid fiber and epoxy resin. 结果表明:超声处理后,纤维表面极性官能团含量增加,比表面积加大,从而改善了芳纶纤维和环氧树脂之间的浸润性。
- Modification of epoxy resin with glycine conferred hydrophilicity on the resin and different series of waterborne epoxy emulsions with stable solid content were successfully prepared. 用甘氨酸改性环氧树脂,使其成为具有亲水性的树脂,并成功制备了系列不同固含量稳定的水性环氧乳液。
- In this paper,imidazole-salts were synthsised with different acid content of lactic acid and imidazole,and were used to accelerate the dicyandiamide curing epoxy resin system. 双氰胺固化环氧树脂时的固化温度高,利用不同含量的乳酸改性咪唑生成的盐作为环氧树脂/双氰胺体系固化促进剂对该体系进行了改进。
- The results show that the level of polysulfide polyurea and the content of hard segment in polysulfide polyurea influence the morphology, T_g and modulus of cured epoxy resin. 结果表明,液体聚硫聚脲齐聚物的用量、齐聚物中聚脲含量对固化后的环氧树脂玻璃化温度、模量及形态有较大影响。
- The cathodic electrophoretic coating of epoxy resin was prepared with half blocked isocyanate as curing agent. 在此采用半封闭的甲苯二异氰酸酯作为固化剂制得了环氧树脂阴极电泳涂料。
- The impregnation increment of epoxy resin for carbonized bamboo board with conventional impregnation is low. 采用常规浸渍的方法,炭化竹板的环氧树脂浸渍量低。
- Electron beam curing of various blends of epoxy resin was studied in this paper. 对几种环氧树脂混合体系的电子束固化进行了研究。
- The effects of hyperbranched polymer(HBPE) on mechanical properties of epoxy resin(EP) curing systems were studied. 研究了羟端基脂肪族超支化聚酯(HBPE)对环氧树脂(EP)固化体系力学性能的影响。
- The effect of the different fillers to the anti-corrosion performances of epoxy resin adhesives are also studied. 试验采用的腐蚀介质有自来水、氢氧化钠水溶液、氯化钠水溶液和盐酸溶液。
- This Peper described production and market Situation and future trend of epoxy resin at home and abroad. 阐述了国内外环氧树脂生产和市场情况以及未来预测。