您要查找的是不是:
- consumable electrode welding 熔化极电弧焊
- consumable electrode inert-gas arc welding 熔化极惰气电弧焊
- consumable electrode arc welding 熔化极弧焊
- A method of measuring weight with microcomputer is designed to indirectly detect it automatically, according to regular cylinder consumable electrode. 基于自耗电极为规则圆柱体,设计了一种以单片机为主的测重法,间接实现了金属液面的自动检测。
- The feeding of consumable electrode and the pushing forming slider t are controlled by computer harmonically. 自耗电极给进、曲拐成型滑块推入,由系统的计算机协调控制。
- This speed regulator is adopted for the automatic feeding of Consumable Electrode in Esc. 该系统已成功地应用于电渣熔铸过程中自耗电极的自动进给。
- In this paper an arc voltage-power compound control system was proposed for developing a vacuum spinning consumable electrode powder making furnace. 本文结合我院研制的旋转电极制粉炉,提出了弧压-功率复合控制自耗电极位置的方案。
- With this approximation equation the control range of the chemical composition of the consumable electrode can be determined. 用该近似计算公式可确定自耗电极元素含量的控制范围。
- This paper introduces a new technique of arc cutting of Ni-Cr stainless steel and copper by means of a consumable electrode with a water jet. 本文介绍了喷水式熔化极电弧切割镍铬不锈钢及紫铜的新技术。
- Is suitable in tungstic electrode welding rod weldings and so on argon arc welding and diameter 1.0- diameter 6 acidity, alkalinity, stainless steel. 适用于钨极氩弧焊及直径1.;0-直径6的酸性、碱性、不锈钢等焊条焊接。
- Using vacuum - induction meting plus vacuum consumable electrode double melting process, the ingot with low- gas conntent and fine homogeneous distribution low inclusion content can be obtained. 采用真空感应熔炼十二次真空自耗重熔工艺,可获得低气体、夹杂含量低并细小均匀分布的钢锭。
- A method of measuring weight with microcomputer is designed to indirectly detect the surface of melted metal of electroslag casting automatically, according to regular cylinder consumable electrode of electroslag casting. 基于电渣熔铸曲轴的自耗电极为规则圆柱体,根据测重法工作原理设计了一套微机控制检测系统,实现了电渣熔铸金属液面的间接自动检测。
- The remelting of consumable electrode and the Mg distribution in various zones at electrode tip during VAR process of a Ni-base superalloy Ni-10Cr-15Co-6W-6Mo-4Al-2Ti were studied. 研究了镍基高温合金Ni-10Cr-15Co-6W-6Mo-4Al-2Ti真空电弧重熔过程中自耗电极熔化特征及电极端部不同区域内Mg的分布。
- The effects of Al and Mo content on the castability of cast Ti-Al-Mo-1Zr series titanium alloys were studied, by using the less active graphite mould at high temperature and pouring with vacuum consumable electrode arc skull furnace. 用在高温下与钛反应性低的石墨型,采用真空自耗电极凝壳炉浇注,运用正交试验设计,测定了Al、Mo含量对Ti Al Mo 1Zr系铸造钛合金铸造工艺性能的影响。
- For ball bearing steel ZGCr15 the best refining effect can be obtained when the consumable electrode is remelted and deoxidized with Si Fe, Si Ca under acidic slag. The inclusions in the steel are of ductile silicate. 对于滚珠轴承钢ZGCr15,当自耗电极用钢采用Si-Fe、Si-Ca脱氧并用酸性渣重熔可以获得最佳精炼效果,使钢中夹杂物转变为硅酸盐类塑性夹杂物。
- The smelting quality can be improved by controlling the shape of consumable electrode tip, which affects the area of the slag/metal interface in electroslag shaped casting process. 在电渣熔铸过程中控制自耗电极熔化末端锥头形状,扩大钢渣接触面积,可以加强精炼效果。
- Design of Weld Tracking Self-Adaptive Fuzzy Controller in Consumable Electrode Arc Welding 熔化极电弧焊焊缝跟踪自适应模糊控制器设计
- consumable electrode cold-mold arc melting 自耗电极水冷坩埚电弧熔炼
- Some metals weld better than others. 有些金属容易焊,有的不容易焊。
- consumable electrode used only for heating 加热用焊条