您要查找的是不是:
- Etching Si Wafer Using Atmospheric Pressure RF Cold Plasma Jet 常压射频冷等离子体刻蚀硅的研究
- A novel cold plasma jet generated by capillary atmospheric dielectric barrier discharge 一种新型大气压毛细管介质阻挡放电冷等离子体射流技术
- high frequency cold plasma jet 高频冷等离子体炬
- cold plasma jet 冷等离子体射流
- Grill, A., 1994, “Cold plasma in materials fabrication “, IEEE PRIES. 张癸森,2001,”以低温电浆提升吸附材表面性质”,私立中原大学硕士论文。
- The Fe-based composite coatings on Q235 steel substrate were formed by plasma jet surface metallurgy. 采用等离子束表面冶金技术,在Q235钢表面制备了铁基合金涂层。
- Results show that ignition delay time becomes longer as loading density of propellants and the distance between propellants and plasma jet increase. 试验结果表明:增大装填密度以及发射药与等离子体喷孔距离,点火延迟时间变长。
- The main work includes: 1.Large area high quality freestanding diamond thick films have been prepared by DC arc plasma jet CVD apparatus. 所完成的主要工作包括:1.;采用直流电弧等离子体喷射法沉积了较大面积的高质量金刚石自支撑厚膜;
- The N-S (Navier-Stokes) equations of the plasma jet were solved to calculate the gas temperature, velocity and oxygen entrainment. 三维模型通过求解等离子射流的N-S方程得出混合气体的温度、速度和氧气浓度等的分布,其中考虑了粒子与等离子射流的相互作用。
- A high-resolution, multi-line spectroscopic diagnostic system was used to detect two spectral line intensities in plasma jet simultaneously. 摘要采用一套高精度多谱线的等离子光谱诊断系统来同时探测等离子体射流中两条谱线的强度。
- In this paper the kinetics of methane cracked and converted to C2 hydrocarbons in cold plasma was investigated. 本论文着重探讨冷等离子体裂解甲烷制C2+烃反应的动力学过程。
- Nanocrystalline free-standing diamond films were deposited by 30kW DC Arc Plasma Jet CVD method on Molybdenum substrate with mixed fed gasses of Argon, Hydrogen and Methane. 在30kW级DC Arc Plasma Jet CVD(直流电弧等离子体喷射化学气相沉积)设备上,采用Ar-H2-CH4混合气体,在Mo的衬底上沉积出纳米金刚石自支撑膜。
- A.MALID SARMADI.T.H.YING.and FERENCZ DENES.Surface Modification of Pdyprpylene Fabrics by Acrylonitile Cold Plasma Textile Res.J.,1993(12):697. 裴晋昌.;低温等离子体对高分子材料表面的改性
- Because of the outstanding quality, high efficient, low cost, and the wide raw material sources, plasma jet surface metallurgy will has a potential in market competition. 由于等离子束表面冶金技术具有突出的优质高效低成本综合优势,且涂层原料来源广,在市场竞争中具有潜力。
- Application of Cold Plasma Technology in fiber-reinforced Composite Materials Kudinov V. V.;Abdullin I. Sh.;Korneeva N. V. 磁共振全心冠状动脉成像技术的初步研究何建勋;孙翀鹏;曾庆思;邓宇;李新春
- Air entrainment in plasma jet and metal particle oxidation by the entrained oxygen were investigated numerically using a three-dimensional computational model LAVA-P-3D. 摘要为了研究等离子体射流中空气的卷吸和由此引起的金属粒子的氧化,建立了等离子体喷涂的三维计算机模型LAVA-P-3D。
- This paper studies moisture properties of two kinds of epoxy resins composite materials of Kevlar fiber which is untreated and treated by means of cold plasma. 本文研究了以冷等离子体处理及未经处理的两种芳纶纤维增强环氧树脂复合材料的吸湿行为。
- Norikazu, K., Yamada, H., Yajima, T. and Sugiyama, K., Surface properties of activated carbon treated by cold plasma heating, Thin Solid Films, Vol.515, pp. 4192-4196, 2007. 黄龙泰,以稻壳和花生壳制备高表面积之活性碳与其应用,国立台湾科技大学化学工程系,硕士论文,2001。
- In this paper, cold plasma technology is used to treat the surface of carbon fibers braided by PET and the surface microstructure of the carbon fiber is analyzed by AFM. 本文作者采用冷等离子体技术对PET缝编碳纤维织物进行表面处理,并采用AFM对处理前后的碳纤维表面形貌进行了分析。
- A coating on NiTi alloys surfaces was prepared under diethylene glycol dimethyl ether (diglyme) microwave cold plasma in electron cyclotron resonance conditions. 在微波电子回旋共振低温等离子体条件下,用二乙二醇二甲醚为试剂对镍钛合金进行表面改性。