您要查找的是不是：
- Cold Flow Test on Laminar Furnace 层流炉流动特征的冷态模拟
- Numerical Simulation and Cold Flow Test for Dual-Bell Nozzle Flow Field 双钟形喷管流场数值模拟与试验验证
- Cold flow tests of aerospike nozzles 塞式喷管冷流试验研究
- TWO-DIMENSIONAL AND TWO-PHASE COLD FLOW TEST IN ENTRANCE REGION OF SUBMERGED NOZZLE 喷管潜入段二维两相冷流实验
- To perform cold flow testing and pass-by measurement 进行冷流量测试和通过测量
- The trim valves of the confirming flow test. 应该确认这些阀门通过流量测试。
- cold flow test 冷流试验
- The diaphragms may become permanently inverted and the elastomeric stem tip can cold flow down the throat of the valve. 横膈膜会永久性的翻转，人造橡胶阀杆尖端会冷变形到阀门的喉管处。
- Slump flow test, slump test, and box test were carried out to evaluate concrete flowability. 混凝土流动性方面则以坍度、坍流度、箱型试验等进行评估。
- When the Teflon is squeezed, it responds by “cold flowing. 当特氟纶受到挤压时，它的反应是“冷变形”。
- Model PG-8 Differential Pressure Meter is a compact differential pressure flow test kit with a self purging feature mounted in a rugged carrying case. 型号PG-8压差表是一种紧凑的压差流量检测组件,具有自我清洗功能,并放置在坚固耐用的手提箱内。
- Diesel engine operators all over the world benefit from the cold flow improver capabilities of Bell's DEE-ZOL PLUS with Anti-Gel. 同时确保了燃料的流动，并有效防止燃油滤清器堵塞。全球柴油机的操作员都得益于带有抗凝胶功能的贝尔DEE-ZOL PLUS的冷流改进剂。
- For most specialty gases, CTFE is recommended over PTFE because it is less permeable to oxygen and moisture, and evidences less cold flow. 对于大多数特种气体，推荐使用CTFE，而不是PTFE，这是因为CTFE对氧气和水蒸汽的渗透性更差，冷变形也较小。
- To perform various test in area such as component fatigue, hot vibration, strain gauging, data acquisition, engine dyno test, chassis dyno test, NVH test, flow test. 能够进行以下领域的各种测试:零部件疲劳、热振动、张力测量、数据获得、发动机台架测试、底盘台架测试、NVH测试和流量测试
- And the cold flow properties of diesel fuel were studied by using the technology of photomicrography and thermodynamics. 利用光学显微技术和热分析技术研究了柴油的低温流动性能。
- This paper presents a performance test of oil containment boom, including sea condition test, flow test and tensile test. The experimental method and results are given out also. 本文对某围油栏性能（抗浪、抗流、抗风和抗拉强度）进行了实验测试研究，并对实验结果和实验方法进行了讨论。
- Some of the other properties to be considered are leak integrity, permeation, cold flow, off-gassing, particle shedding, and cost. 要考虑的一些其它性质是泄露完整性、渗透、冷变形、排气、颗粒脱落和成本。
- Based on the research about Graphic Theory and Data Flow Test Theory, an automatic test sequences generation algorithm (BDF-SGA) is proposed by the author. 根据对图论和数据流测试理论的研究，本文提出了基于数据流测试准则的测试序列自动生成算法（BDF-SGA算法）。
- The effect of three commercial cold flow improvers (T1, T2 and T3) on the cold flow property of two FCC diesel fuels (A and B) was studied. 摘要 考察了三种市售柴油低温流动性改进剂（T1,T2,T3）对两种催化裂化柴油(柴油A、柴油B)的低温流动性的改善效果。
- This strain of wheat can grow during a cold spring. 这种小麦可以在寒冷的春天生长。
