您要查找的是不是:
- cold extrusion crack 冷挤压裂纹
- WUXI SUPERHUMAN GEAR COLD EXTRUSION CO., LTD. 无锡市神力齿轮冷挤有限公司。
- The blank treatments before cold extrusion were also drawn up and the die structure of the cold extrusion was designed. 拟制了冷挤压前的毛坯处理及设计了冷挤压模具结构。
- Abstract: There are lots of advantages by cold extrusion for straight knurlnut in a single process. 文摘:直纹滚花螺母采用冷挤压一次成形新工艺,成效显著。
- An example shows the application of the CAD of cold extrusion die for slot wedge. 并结合一个应用实例来说明槽楔冷挤模CAD系统的应用。
- The main parameters of open-die cold extrusion without mandrel of thick-wall tube are analyzed. 分析了厚壁管件无芯棒开式冷挤压的主要参数;
- Abstract: There are lots of advantages by cold extrusion for straight knurl nut in a single process. 摘 要: 直纹滚花螺母采用冷挤压一次成形新工艺,成效显著。
- There are lots of advantages by cold extrusion for straight knurl nut in a single process. 直纹滚花螺母采用冷挤压一次成形新工艺,成效显著。
- EMFORM423 is a heavy duty lubricant for cold extrusion of nuts, bolts, screws, bearing parts, gears and many other steel parts. EMFORM423是用于螺丝、螺帽、螺杆、轴承组件与齿轮等多种钢质五金件冷锻加工的重负荷型润滑剂。
- This paper introduces structure of all-plastic commutator and its cold extrusion moulding technics, emphasizes on the essentials in its mould design. 介绍全塑换向器的结构和它的冷挤成型工艺,同时详细叙述其模具设计中的要点。
- Jiufeng possess all kinds of cold extrusion press production line, which includes process of feeding, flaying, and surface treatment etc. 公司拥有强大的工艺技术力量,能够独立完成冷挤压产品的工艺设计和开发,能够独立完成冷挤压模具的设计和制造。
- Cold working strain phosphating includes drawbench phosphating,cold extrusion phosphating and cold stamping phosphating. 冷加变形磷化主要包括拉丝磷化、冷挤磷化、冷冲磷化。
- Before cold extrusion T3 copper tube surface appears serious corrosion after soften anneal and pickling, which cause the whole products rejected. 摘要T3铜管衬套在冷挤压成型前的软化退火、酸洗后其表面产生严重腐蚀,造成整批产品报废。
- The cold extrusion process without mandrel craft is introduced through the process analysis of the terminal in this paper. 通过对端子的工艺分析,提出无芯冷挤压工艺。
- Before cold extrusion T3 copper tube surface appears serious corrosion after soften anneal and pickling,which cause the whole products rejected. T3铜管衬套在冷挤压成型前的软化退火、酸洗后其表面产生严重腐蚀,造成整批产品报废。
- We know that hydraulic extrusion cracked coal bed of working-face, advanced the maximum main stress zone,improved the width of flaw zone,lowing the fatalness of coal outbrusting. 通过对3246风巷高压注水试验,水力挤出使工作面前方的煤体压裂,集中应力区向前推移,卸压带宽度增加,降低了煤的突出危险性,起到了消突作用。
- Cold extrusion characteristics of all kinds of Al and Al alloy are analyzed and the dimentional accuracies currently obtained are described in this paper. 从分析铝及其合金材料的冷挤压性能入手,阐述了各种类型铝及其合金的冷挤压特点,以及目前所能达到的尺寸精度。
- Sheet metal such as fold, rebound, etc, drawings such as fold, scratch, crack etc, cold extrusions, such as radiation, ring problem, try my best to resolve at the time mold design, trail run. 钣金件的褶皱、回弹等,覆盖件、拉伸件的褶皱、划伤、拉裂等,冷挤压件的放射线、环槽问题在模具设计、产品试制时加以注意,解决。
- On the basis of the analysis of cold extrusion process for the duralumin drive wheel,the scheme,the drawing and the blank dimension of cold extrusion were worked out. 对硬铝主动轮的冷挤压工艺进行分析,确定了冷挤压零件图和冷挤压方案及毛坯尺寸,对零件冷挤压的变形程度进行了校核,计算了挤压吨位,拟定了挤压前的毛坯处理规范,并对模具结构进行了介绍。