您要查找的是不是：
- coatings film defection 涂层缺陷
- coating film defect [化] 涂膜病状
- Modified with additives,silica powder and micro wax,a clear coatings film based on cross linkable,fluorocarbon resin is prepared. 通过表面助剂、硅粉、蜡粉对交联型氟树脂进行改性,制备清漆涂膜。
- This article has described a number of scribing patterns of coatings film in neutrae salt spray test and discussed the evaluation methods of results. 介绍了涂层试板耐中性盐雾试验中关于划线的几种形式、划线方法以及试验后的评定方法,并对这些方法进行了讨论。
- This paper has briefly discussed the factors that influence the performance of coil coatings film, such as T bend, MEK resistance and adhesion, etc. 简述了影响卷材涂料T弯、耐MEK性、附着力、铅笔硬度、耐沾污性等性能的因素。
- The crocking resistance of coatings film is tested by use of adhesive tape, sticking off or peeling off of the marks painted with waterborne or solventborne marking pens. 结果发现表面粗糙度和表面助剂的共同作用可有效防止记号笔对涂层的粘结,粗糙表面的涂层亲水、亲油性对抗粘结作用有较大的影响,涂膜在水浸泡前后的抗粘性效果表现不同。
- The influence of the migration of pl asticizer on the performances of coatings film is introduced.How to reduce the amount of the plasticizer is discussed. 介绍了增塑剂的迁移性对涂层性能的影响,讨论了如何降低增塑剂的用量。
- Outstanding adhesion to coating film and steel surface. 对漆膜及钢铁表面具有极好的附着力。
- The synthesis of unsaturated acrylic prepolymer design of coatings formulation and influencing factors are discussed.The properties of coatings film are characterized. 本文讨论了不饱和丙烯酸酯树脂的合成和涂料的配方设计,并对涂膜性能进行了表征,讨论了影响涂料性能的因素。
- Repair, seam filling and coating film materials for wall. 修补、填缝、不垂流壁材涂覆保护膜。
- Factors that influence the scratch resistance of the coatings film are discussed. Ways to improve the film scratch resistance are proposed experimentally. 讨论了影响漆膜抗擦伤性的因素，结合试验，提出改善漆膜抗擦伤性的途径。
- The coatings film will be dilatated when contacted to fire, forming a high dense and microporous fire proofing layer to prolong the fire retardant limit of steel structures. 由该涂料制得的涂层遇火发泡膨胀，形成具有一定厚度的密实微孔状阻燃层，从而提高了钢结构的耐火极限。
- I got a new coat in that store last week. 上礼拜我在那家店买了一件新外套。
- This article has discussed the influence of surface treatment of aluminum plate and adhesion,MEK rub resistance,pigment and binder ratio,and amount of catalyst on the boiling ware resistance of coatings film. 讨论了铝板表面处理及涂料的附着力、耐甲乙酮性、颜基比、催化剂用量等对涂膜耐沸水性的影响。
- The title IR radiation powder is prepared by spray dry technology,which is calcined at high temperature to form spinel structure,and then sprayed with plasma forming IR radiation coatings film. 采用料浆喷雾干燥工艺制备团聚型红外辐射粉体材料,经高温焙烧产生尖晶石结构,再用等离子喷涂工艺制备红外辐射涂层。
- Based on the study of the bubbling phenomena around the crosscut of coatings film in neutral salt spray test,this article has analyzed the cause of bubbling and proposes effective solutions. 通过对中性盐雾试验中漆膜划痕处起泡现象的研究,分析了起泡产生的原因,提出了相应的解决方案。
- That was infinitely better than his last film. 这比他上一部电影不知胜过多少倍。
- Keywords thermosetting powder coa tings;film defect;film quality; 热固性粉末涂料;涂膜弊病;涂膜质量;
- The minimum time after spraying at which lamination can be begun is the time at which the gel coat film backside can be brushed lightly with a clean, dry finger without leaving residue on the finger. 喷洒树脂的时机，一定要等胶壳完全乾后，或是你可以用乾净、乾燥的手指，轻轻抹过胶壳，且不会留下任何的残渣在你的手指上，便可开始喷洒树脂。
- The alterations to your coat will take a week. 你的外衣改一改要花一个星期。
