您要查找的是不是：
- system clock control signal 系统时钟控制信号
- clock control signal 时钟控制信号
- Digital Clock Control - Digital Clock Control. 这是一个数字显示式时钟控件。
- Your alarm clock control is almost complete. 警报时钟控件已经基本完成。
- The other host of signal are control signals. 另一组信号是控制信号。
- The response of a terminal to remote control signals. 终端对远程控制信号的响应。参阅handshaking。
- Expands the control signal for parallel steam generators. 使用并联的蒸汽炉时可用此配件扩大控制讯号。
- The pendulum of a clock controls the speed of the clock. 钟摆控制着钟速。
- A control signal. 一个控制信号。
- Design Of Programme - controlled Signal. 程控信号发生器的设计。
- Injector #2 output driver does not respond properly to the control signal. 喷嘴%232输出驱动器未对控制讯号作出正炒应。
- An example of a custom control is a clock control that duplicates the appearance and behavior of an analog clock. 时钟控件即是一个自定义控件,它复制模拟时钟的外观和行为。
- Injector #output driver does not respond properly to the control signal. 喷油器%237输出驱动器没有正确地响应控制信号。
- The Clock &Power management block consists of three parts: Clock control, USB control, and Power control. 时钟和电源控制模块包含三个部分：时钟控制，USB控制，和电源控制。
- For checking the evaluation device a control signal can be generated. 通过产生一个控制信号来检查核定设备。
- The Clock & Power management block consists of three parts: Clock control, USB control, and Power control. 时钟和电源管理模块由三部分组成：时钟控制，USB控制和电源控制。
- The main control cell adopt LPC936 singlechip, which offers the control signal. 其主控制单元采用LPC936单片机，提供控制信号。
- The control signals for the ac-excitation must be non-overlapping clock signals. 控制信号为交流励磁时必须不能重复时钟信号。
- IIC MCU MSP430F241 * clock control chip PCF8563, the realization of time and the time to read and write the output format. 系列单片机IIC控制时钟芯片PCF8563，实现时间的读写以及时间的输出格式。
- Table 3-25 is a truth table of the 8251 bus control signals. 表3-25是8251总线控制信号的真值表。
