您要查找的是不是:
- Rolling bearing chamfer dimension limits GB/T274-1991滚动轴承装配倒角极限
- largest permissible single chamfer dimension 允许最大单一倒角尺寸
- Chamfer dimension at large outer ring face 0,3 mm 大外圈面的倒角尺寸为0,3毫米
- Chamfer dimension at large inner ring side face 3 mm 大内圈侧面的倒角尺寸为3毫米
- Time is sometimes called the fourth dimension. 时间有时被称为第四度空间。
- The appropriate maximum chamfer limits, that are important when dimensioning fillet radii are in accordance with the Standard ISO 582:1995 and can be found in the section "Limits for chamfer dimensions". 合适的倒角最大值范围对标注倒角半径尺寸是很重要的,这个值范围与ISO582:1995相符,可在“倒角尺寸的范围”一节找到。
- Chamfer dimension limits for metric radial and thrust bearings, except tapered roller bearings 公制径向和推力轴承(圆锥滚子轴承除外)的倒角尺寸极限值
- There is a dimension to the problem that we have not discussed. 这问题还有一方面我们没讨论过。
- washer chamfer dimension 垫圈倒角尺寸
- axial chamfer dimension 轴向倒角尺寸
- axial single chamfer dimension 轴向单一倒角尺寸
- nominal chamfer dimension 公称倒角尺寸
- radial chamfer dimension 径向倒角尺寸
- Chamfer heights for broken edges. 是什么倒角高度啊。
- Inspection machining dimension of rudder pintle. 舵销机加工尺寸检查。
- ring chamfer dimension 套圈倒角尺寸
- The measure or dimension from side to side; width. 宽度,幅度从一边到另一边的尺寸或范围;宽度
- Then ascension towards another dimension can begin. 之后提升到另一维度才能开始。
- Dimension A, center of valve port to floor level. 尺寸A,阀门端口中心至地面的距离。