您要查找的是不是：
- Basing on the fabrication technology of ternary boride cermets cladding material (6B) , its interface formation mechanism is studied. 根据三元硼化物金属陶瓷硬质覆层材料6B的制备工艺,研究了该硬质覆层材料界面过渡层的形成机理。
- Cermet cladding material is a new kind of material with high wear resistance,which is qualitatively and quantitatively studied by many researchers. 金属陶瓷硬质涂覆层材料是一种具有高耐磨性能的新型覆层材料,许多学者对其耐磨损性能进行了定量和定性研究。
- Ternary boride based cermet cladding material was prepared by in situ reaction and liquid phase sintering technology in vacuum furnace. 在真空烧结炉中通过原位反应液相烧结工艺制备出三元硼化物基金属陶瓷覆层。
- Cermet cladding material is a new kind of composite material with high wear resistance, it is especially suitable to manufacture parts under wear condition. 摘要金属陶瓷硬质覆层材料是一种具有高耐磨损性能的新型层状复合材料，尤其适应于耐磨损零件的制造。
- The bonding strength between cermet cladding and steel substrate was expressed using the bonding strength of two bonded steel plates bonded by cermet cladding material. 根据液相烧结三元硼化物基金属陶瓷覆层材料的工艺特点,用金属陶瓷覆层将两钢板进行液相烧结连结,以覆层对两钢板的连结强度表征覆层与钢基体的结合强度。
- Abstract: Using liquid phase sintering technique, ternary boride cermet clad material was prepared, and have good properties as lower cost, high wear resistance, high corrosion resistance. 摘要：采用液相烧结技术制备的三元硼化物基金属陶瓷覆层材料具有成本低廉、耐磨抗蚀的优异性能。
- ternary boride cermets cladding material 硬质覆层材料
- The influence of alloy ingredient on corrosion resistance of ternary boride cermet clad materials was studied. 研究了合金组分对覆层材料耐腐蚀性的影响。
- Research on Wear Resistance of Cermet Cladding Material 金属陶瓷硬质涂覆层材料耐磨损性能研究现状
- A New Type Steel Cladding Material- Ternary Boride Base Cermet Cladding Material 一种新型钢材覆层材料-三元硼化物基金属陶瓷覆层材料
- Research on Equivalent Bending Strength of Cermet Cladding Material for Clad in Press Condition 金属陶瓷硬质覆层材料覆层受压时的等效抗弯强度研究
- Slip Forming Technique for Preparing Green Body of Cermet Cladding Materials 金属陶瓷覆层材料坯体的料浆法成形工艺
- cermets cladding material 金属陶瓷硬质覆层材料
- Study on Corrosion Resistance of Ternary Boride Cermet Clad Materials 三元硼化物金属陶瓷覆层材料耐腐蚀性能研究
- cermet cladding material 金属陶瓷硬质涂覆层材料
- Influence of Alloy Ingredient on Mechanical Property of Ternary Boride Based Cermet Cladding Materials 合金组分对金属陶瓷覆层材料性能影响的研究
- cermet clad material 金属陶瓷覆层材料
- The conclusion can be used to guide the manufacturing of ternary boride cermets cladding parts. 本文的研究结果对于三元硼化物金属陶瓷硬质覆层零件的制造具有实际意义。
- For welded seams in clad material, filler metals selected from the following table shall be used. 对于复层上已焊过的接缝应从下表选用填充金属。
- Welding material selction of clad plate refers to those of the same clad material respectively. 复层焊接材料挑选参考异类复层材料焊接时选用的焊接材料。
