您要查找的是不是：
- centrifugal pressure casting 离心铸法
- Selfmade pressure casting manifold,tank,pump. 自产压铸阀块、齿轮泵、油箱、60%25出口。
- The paper discusses the types of the dynamic easting, the centrifugal force fields, the shapes of the free surface, the centrifugal pressure calculation and the deinition of the dynamie casting speed. 论述了动态浇注的类型、离心力场、自由表面形状、离心压力的计算和动态浇注转速的确定。
- It mainly produces all sort of exterior rotor flow fan, centrifugal fan, eddy fan, exterior rotor motor and all kinds of motor stator and rotor plate and Aluminum pressure cast parts. 公司主要生产各类外转子轴流风机、离心风机、涡流风机、外转子电机，以及各类电机定转子冲片、铝压铸件。
- The improvement of casting process was conducted to eliminate the defects in F3 cylinder cap in low pressure casting. 针对低压铸造F3汽缸盖出现的铸件缺陷,在铸造工艺上进行了改进。
- The technology of medium-high pressure casting to form the sanitaryware body is the up-to-date one in the world today. 卫生陶瓷中、高压注浆成形工艺是当今世界卫生陶瓷成形的最新工艺。
- The graphite particulate-aluminium matrix composites are developed by compocasting followed by pressure casting. 用复合铸造及压铸法制备了石墨颗粒铝基复合材料。
- The newly developed modular designed cup pressure casting plant TDA 50 for the production of complex cup shapes. 此套杯具设备是专为造型复杂的杯具成型而设计。
- Production Type: Casting pattern, qravity pouring Pattern, low-pressure casting pattern, Pressure casting pattern, Waxen pattern, Die-casting. 产品种类：铸造模具、重力浇注模具、压铸模具、低压铸造模具、失蜡铸造模具、冲压模具。
- ALUMINUM DIE CASTING MOLDS.2.GRARITY CASTING MOLDS.(PERMAN ENT MOLDS)3.LOW PRESSURE CASTING MOLDS.4.PLASTIC INJECTION MOLDS. 5.CORE BOX. 压铸模2.;重力铸造模3
- Intermetallic compound foam reinforced aluminium alloy surface composite layer are obtained by solution treatment after low pressure Casting. 通过低压铸造后固溶处理的方法，获得了网状金属间化合物增强铝合金表面复合层。
- This paper deals with the flowing phenomena of liquid metal in lift tube,crucible,and mould cavity in low pressure casting. 分析了低压铸造中液态金属在升液管、坩埚、型腔中的流动现象。
- The pressure casting process of oval platter was narrated,snd the requirements for plaster mould were given in this paper. 叙述了鱼盘压力注浆成形的过程和结果，列出了对石膏模型的要求。
- The principle of vacuum pressurizing casting technique is introduced in detail. 论述了真空增压铸造技术原理。
- Metal gravity and low pressure casting, sand gravity and low pressure casting, high pressure switch eclectric casting; cylinder cap, intake manifold, control valve body and so on. 金属型重力、低压铸件,砂型重力、低压铸件,高压电器铸件;气缸盖、进气岐管、调节阀阀体等。
- It is a preferable way to make porous bioceramics with controllable macrostructure by integrating hot pressure casting and burning off technology of hole-making reagent. 将热压注成型技术与成孔剂烧失技术有机结合在一起,是制备可控多孔生物陶瓷的一种较好的制备方法;
- The result shows that the strength, especially elongation, of adjusted pressure casting sample is increased dramatically under the same conditions of melting and heat treatment. 结果表明,在相同的熔铸工艺和热处理条件下,调压铸造试样的强度,特别是延伸率得到大幅度提高。
- The main capacity and uses,produce techniques and technologic process was introduced.The main equipment of polyurethane screen with normal pressure casting was recommended. 介绍了常压浇注聚氨酯筛板的主要性能及用途,阐述了其生产技术、工艺过程和所需用的主要设备。
- Feeding, ingate design, air discharge,position of signal wire were analysed and discussed, aiming at the several questions in production of low pressure casting. 根据低压铸造工艺的特点和生产实践,从补缩、内浇道设计、排气、信号线安放位置等方面进行了分析和探讨。
