您要查找的是不是:
- Centrifugal casting, compact structure, free from pinhole porosity and slag, smooth surface and even wall thickness. 高速离心铸造,组织致密,无砂眼、夹渣,表面光滑、壁厚均匀。
- Filled MC Nylon is a centrifugal casting of MC Nylon with some lubricants, such as BN, MoS2 and graphite. 填充MC尼龙是以MC尼龙为基体,添加氮化硼、二硫化钼、石墨等固体润滑剂后离心浇铸而成。
- AbstractThe centrifugal casting process of high aluminum-zinc alloys was investigated through products. 结合产品试验了高铝锌基合金的离心铸造工艺。
- The effects of mischmetal addition on the microstructure in centrifugal casting lead brinze hare been studied. 研究了混合稀土对离心铸造铅青铜组织的影响。
- The two motor driving rollers of the centrifugal casting machine must keep synchronous and keep load balance. 离心浇铸机两驱动辊在运行过程中既要保持同步,又要保证两台电机的负荷平衡。
- The technical parameters and production process of the combine roller made from high Ni Cr cast iron by centrifugal casting were intruduced in detail. 详细介绍了离心铸造高镍铬铸铁复合辊套内外层金属铸造工艺参数及整个铸造生产过程。
- The high-Cr cast iron which is modified by 0.8% V-Fe is obtained by centrifugal casting and high Cr iron microstructure and performance are discussed. 采用0.;8%25钒铁变质后的高铬铸铁;进行电磁离心铸造浇铸;研究高铬铸铁组织和力学性能变化。
- In the process of centrifugal casting, the stable overturn speedof the sector ladle is the main reason to influence the quality of casting pipes. 在离心铸管浇注过程中,扇形包翻转速度稳定与否是影响铸管成形质量的主要因素。
- The zonal porosity in centrifugal casting of high aluminum ZA alloy is described and its formation mechanism is analyzed. 介绍了高铝锌合金离心铸件带状缩松的形态特征,并对其形成机理进行了分析。
- Vertically centrifugal casting of tie-in has been introduced, which includes principia of design and technological coefficient. 摘要介绍了管接头铸件立式离心铸造工艺,其中包括设计原则和工艺参数。
- Double-ended pouring technology is used to compound high-chromium resistant cast iron in internal-wall of steel pipe with centrifugal casting. 介绍了托轮式离心铸造机双头浇注技术在钢管内壁复合高铬耐磨铸铁复合管的生产工艺。
- The results show that the greater casting thickness, rotating speed and radius of centrifugal casting are, the greater the filling ratio are. 试验结果表明,试样铸件厚度越大,离心半径越大,离心转速越高,铸件型壳的充填率越高。
- The hardness and depth of chill layer on the roller outer surface can be raised with adding trace Bi into liquid Fe in centrifugal casting. 离心铸造时在铁水中加入微量的铋,可以提高滚筒外壳冷硬层的硬度和深度。
- Copper casting process flow realizes electrical furnace centrifugal casting, this flow increases the cage inner quality, enlarge production ability. 铸铜工艺生产流程实现了电炉化离心铸造,提高了保持架的内在质量,扩大了生产能力。
- The improved-type bainite ductile cast iron roll was developed by centrifugal casting and low temperature tempering technology and adjustment alloy composition. 采用离心铸造+低温回火工艺并通过合金成分调整和工艺控制,生产出"改进型"贝氏体球铁轧辊。
- The material of metal mould, the structure characteristics of A type connector metal mould and the influence on mould for centrifugal casting have been introduced . 本文介绍了适合于制作离心铸造用金属模的材料和A型接口金属模的结构特点及其对模具的影响。
- The mechanical properties, microstructures and application of centrifugal casting composites roller ring have been investigated by SEM EDS-analysis in the paper . 通过扫描电镜、电子能谱分析,研究了离心铸造复合材料辊环的机械性能,微观组织及其应用。
- It can finish casting for 200 times in one hour.It is used for centrifugal casting of ornaments craftworks which are made of zinc alloy, terne alloy, metal, wax, resin etc. 每小时可完成铸造200次,用于对锌合金、铅锡合金、金属、蜡、树酯等饰品工艺品的离心铸造、可生产包括小到中级的可生产包括小到中级的皮革和鞋业配件、奖品、服装配饰、珠宝、扣形装饰物、奖章、装饰纪念用金属板、锁眼金属部件等。
- The shortcomings of horizontal centrifugal casting machine are analyzed, and a vertical casting unit in structure of double-layered hollow abdomen is designed. 文章分析了卧式离心铸造机的不足,并针对这些不足,设计了一种双层空腹主轴结构的立式离心铸造机。
- Although there are a lot of the fabricating techniques of functionally gradient material (FGM),the centrifugal casting method is more effective,cheaper and easier to operate. 虽然梯度功能材料的制备方法很多,但效率较高、成本较低、操作较简单的方法是离心铸造法。