您要查找的是不是：
- cavity volume fraction 空洞体积分数
- The more liquid volume fraction in the tank is, the less finial pressure is. 相同充满率下，初始压力对工作时间影响较小。
- CONCLUSION The partition coefficient for volatile anesthetic in lipid emulsion accordes with volume fraction partition coefficient concept. 结论挥发性麻醉药在脂肪乳中的分配系数符合容积比分配系数的概念。
- Inclusion complex's stereomodel structure show host has enough cavity volume and deepness to receive guest.From the structural point, the inclusion ratio also is 3:1. 通过立体模型构筑说明主体有足够的空腔体积和深度容纳客体，并从结构上看来可以形成包合比是3：1的包合物。
- Furthermore, the bond splitting tensile strength increases with addition of steel fiber volume fraction. 在一定范围内,随钢纤维体积率的增加,钢纤维混凝土与老混凝土粘结劈拉强度明显提高。
- Note: If the total volume collected downstream during the burn and/or cooldown is less than the body cavity volume, the through leakage can be assumed to have been zero. 注：在燃烧和冷却期间，如果从出口端部收集到的所有泄漏量少于阀体容积，则阀座的泄露可以被认为是零泄漏。
- Optimum wear reduction was obtained when the volume fraction of Kevlar pulp is 40 Vol%. 当纤维体积分数为40%25时，复合材料的比磨损率最小；
- The wound area, wound cavity volume and healing time were recorded, granulation tissue growth and epithelization in wound were observed, and wound healing status was evaluated. 记录创面面积、伤腔容积及愈合时间，观察创面肉芽组织生长及再上皮化，评价创伤修复情况。
- The latter one was responsible for a change in solid volume fraction when the material passes the discon... 为在实际触变塑性成形工艺分析中的进一步应用奠定了理论基础。
- The experiment deter-mines their hardness,their microorganizations as well as their Carbide Volum Fraction. 对宏观硬度、碳化物数量与耐磨性进行了相关分析。
- The volume fraction of methane,ethane, n -butane and propane are increased with the increase of dose. 甲烷、乙烷、丙烷和正丁烷的体积分数都随吸收剂量的增加而增加;
- The effects of volume fraction and concrete strength on tensile strength of SFRC are analyzed with an experiment. 通过试验，分析了钢纤维混凝土极限抗拉强度与钢纤维体积掺率及基体强度等级的关系。
- The major problems involved in fabricating large, high fiber volume fraction components by RTM, are discussed. 阐述了RTM工艺应用于大尺寸,高纤维含量构件时存在的主要问题。
- The compressibility of fabric preforms,involved in the fiber volume fraction(Vf) in the compress process,was studied. 研究了预定型织物在压实阶段的可压缩性,涉及压缩过程中纤维体积含量的变化特点。
- The cavity volume filled result is generated by an Injection Compression analysis,and shows the volume of the cavity filled at various time steps over the duration of the analysis. 模腔填充体积?这个结果是压缩注塑分析产生的结果，是指在分析的不同阶段模腔所充填的体积。
- The action principle is as follows : When the valve body at around 2 pm between iron block, the spring plunger 12 13 stretch under left movements, the plunger cavity volume have increased LV cavity. 其动作原理如下：当泵阀体处于前后两挡铁之间时，柱塞12在弹簧13的弹力作用下向左运动，使柱塞腔的容积增大产生低压腔。
- The formula to calculate effective permittivity of particle-filling composite materials is worked out by calculating different volume fraction model. 通过计算不同体积分数的材料模型的等效电磁参数，得到了颗粒型复合材料等效介电常数的计算公式。
- Objective:Acoustic rhinometry (AR) was performed to standardize the measurement techniques, result interpretation and reference values of nasal cavity volume (NV) in preschool children. 目的:使用鼻声反射技术检测学龄前儿童鼻腔容积,提出检测方法、结果分析方法以及相关正常参考值。
- The normalized effective conductivity of the composite can be viewed as a function of the dipole polarizability and the volume fraction of the fiber. 复合材料之正规化有效导热度可视为此双极极化度与纤维体积分率之函数。
- Second, two typical samples of the (PS-g-PI)-b-PS comb-coil diblock copolymer with PS volume fraction close to 0.5 were investigated. 二、 利用原子力显微镜（AFM）、透射电子显微镜（TEM）和小角x射线散射（SAXS）研究聚合物本体形态。
