您要查找的是不是:
- card reader status 卡片读出状态
- How did the Card Reader protect SAM card? 读卡机如何保护安全模组卡?
- No PSCR Smart Card reader found in the system. 在该系统中找不到PSCR智能卡读取器。
- No USB smart card reader found in the system. 在系统中没有找到USB智能卡读取器。
- Place the memory card in the memory card reader. 将存储卡插入读卡器。
- No smart card reader is installed. 没有安装智能卡读卡器。
- You will need your camera's USB cable, or a memory card reader. 你需要相机的usb数据线或者一个读卡器。
- Insert the Compact Flash card into the card reader (figures 51 and 52). 将CF存储卡插入读卡器中(图51和图52)。
- Device for Smart Card Reader cannot be created due to an internal error. 由于内部错误,无法为智能卡读取器创建设备。
- Use a memory card reader if your computer has a USB or FireWire port. 如果您的电脑有USB或FireWire端口,请使用内存读卡器。
- In working status, put the attendance card in the antenna inductive zone (2cm) of internal and external card reader , the card reader will tootle and the screen will display ID number or the card number . 在工作状态下,将考勤卡放在考勤机内置和外置打卡感应区2厘米内,相应的打卡头发出“嘀”声,多功能显示器显示考勤卡的工号或卡号。
- In computer peripherals, a pile up of cards in a card reader. 在计算机外围设备上,卡片阅读机内卡片成堆而不能处理的现象。
- No smart card readers were found. 没有找到智能卡读卡机。
- Manages and controls access to a smart card inserted into a smart card reader attached to the computer. 对插入在计算机智能卡阅读器中的智能卡进行管理和访问控制。
- The firmware version of the smart card reader is not supported by the current driver. 当前驱动程序不支持智能卡读取器的固件版本。
- You can learn the card reader is normal by operating the card reader self-test button or using the test card to verify. 可先行操作读卡设备本身之自我测试功能键,检查读卡设备是否正常或使用测试卡测试。
- The images are imported from the memory card and into the computer by using a media card reader. 采用存储卡读卡器,从记忆卡读取图片,并保存到电脑上。
- Terminad port: As a portion of safety system, this port can connect camera or card reader. 自动识别接口:作为安防系统组成部分,该接口可与摄像头、读卡器连接,用于车辆的自动识别及放行。
- Use a PC Card adapter if your computer has a PC Card slot (PCMCIA) or is connected to an external PC Card reader. 如果您的电脑有PC卡插槽(PCMCIA)或者连接至外部PC卡读卡器,请使用PC卡适配器。
- RF card readers adopt TTL232 mode or Wiegand26 mode, mostly. 射频卡读头大部分都是采用TTL232方式或Wiegand26方式输出。