您要查找的是不是：
- cantilever beams model 悬臂梁模型
- The structure consists basically of two cantilever beams. 这种结构基本上由两根悬臂梁组成。
- By reviewing relevant literatures, it is known that the design model is similar to the cantilever beam structure. 中文摘要植牙术后的骨整合程度，关系到手术是否成功。
- A mathematical model has been derived that the large deflection of cantilever beam occurs jointly by a variable couple along with a changing tangential force ov... 由此导出悬臂端在受力偶、法向力和一大小、方向不断变化的切向力的共同作用下,悬臂梁大挠度变形的数学模型,并采用网格与逐次逼近凑解法求得模型的数值解。
- Based on the constitutive equation and the governing motion equations of the ADF model, a finite element equation of a visoelastic free-layer damping (FLD) cantilever beam is established. 算例表明，本文确定模型参数的方法是有效的；
- Micron-sized cantilever beams of a 304 stainless steel were fabricated by focused-ion-beam (FIB). 采用聚焦离子束溅射蚀刻加工了微米尺寸304不锈钢悬臂梁试样。
- Using piecewise linearity system theory, the harmonic excitation nonlinear response of clearance restriction cantilever beam system was researched.Firstly, the dynamic, model of this system was build. 摘要运用分段线性系统分析理论，研究间隙约束的悬臂梁振动系统在简谐激励下系统稳态响应的动力学行为。
- The piezoelectric bimorphs of cantilever beams are used to fabricate a microgripper which is used in micromanipulation system. 摘要采用双晶片型压电悬臂梁制作一种双悬臂梁结构的微夹钳，可用于微操作系统中的微夹持器。
- Force-measuring elements employ either a cantilever beam or a column arrangement. 测力元件采用悬臂梁或柱的形式。
- The large deflection problem of cantilever beams is studied by means of pseudolinear approach and the result is compared with that by algorithm of nonlinear governing equation. 利用拟线性分析方法,研究了悬臂梁的大挠度问题,并与该问题的双参数摄动算法进行了比较。
- This paper performed a flexural test of 6 full-scale continuous beams and 2 full-scale cantilever beams with development lengths of negative reinforcements in two batches. 本文完成了负弯矩钢筋分两批切断的六根足尺约束梁和两根足尺悬臂梁的弯曲破坏试验。
- Finite element design, cantilever beam withstanding load distortion situation, some graphical displays. 详细说明:有限元设计,悬臂梁承受荷载的变形情况,有图形显示。
- The dynamics of a cantilever beam attached to a rotating rigid body is reported in this paper. 摘要本文对固结在转动刚体上柔性梁的动力学问题进行了研究。
- Dynamical characteristics of the cantilever beam were analyzed and its dynamical equation was developed by using PEA. 采用有限元分析方法研究悬臂梁的动态特性，建立其动力方程。
- A cantilever beam was experimentally studied with this method and the result is consistent with theoretical result. 以悬臂梁为例进行实验研究，实验结果与理论计算结果吻合较好。
- With hoisting method by double cantilever beam,the hoisting of large steel trusses was get success. 双悬臂梁吊装法解决了大型钢桁架高空吊装问题,且省工、省料,实践证明,该法安全、可靠,较为实
- Cantilever beam of key strata breaks and caves into blocks,which is periodic weighting of mining face. 关键层悬臂梁破断垮落成承压砌块,其垮落及沿架后切落,形成工作面周期来压。
- L-BS type cantilever beam load cell, with one end fixed, another end loaded, steel ball transfering force, it has a good sealed structure. L-BS型钢制悬臂梁式称重传感器,一端固定、一端加载,钢球传力,并设有良好的密封结构。
- Active vibration control for a cantilever beam was studied based on the combination between finite element analysis (PEA) and modal control. 摘要结合有限元分析方法与模态控制来抑制悬臂梁的振动。
- The experiment result shows that the compensation of convex corners and short corners of cantilever beam in EPW by the method. 实验结果表明，该方法能够较好的完成对EPW腐蚀液中悬臂梁凸角削角的补偿。
- 今日热词
-
- 深远海浮式风电平台 - deep-sea floating wind power platform
-
- 京雄高速公路 - Beijing-Xiongan expressway
-
- 农业及相关产业增加值 - the added value of agriculture and related industries
