您要查找的是不是:
- breaker arm adjusting screw 断电臂调整螺钉
- If valve clearance needs to be adjusted, loosen the locknut on rocker arm adjusting screw.Turn adjusting screw until feeler gauge slips with a slight drag. 如果气门间隙需要调节,松开摇臂调节螺丝上的防松螺母,转动调节螺丝直到测隙规滑动时稍带阻力为止。
- steering arm adjusting screw wrench 转向臂调节螺钉扳手
- 5.If valve clearance needs to be adjusted, loosen the locknut on rocker arm adjusting screw.Turn adjusting screw until feeler gauge slips with a slight drag. 如果气门间隙需要调节,松开摇臂调节螺丝上的防松螺母,转动调节螺丝直到测隙规滑动时稍带阻力为止。
- The high step moves from under the adjusting screw. 使高点从调节螺钉下移动。
- The adjusting screw rests on the high step of the cam. 调节螺钉落在凸轮高点上。
- To Readjust- Loosen lock nut on the adjusting screw. 重新调节:松开调节螺丝上的锁定螺母。
- To Readjust - Loosen lock nut on the adjusting screw. 重新调节:松开调节螺丝上的锁定螺母。
- Remove compression from spring by turning adjusting screw (1) counterclockwise. 通过反时针方向旋转调节螺丝(1)从弹簧上拆卸压缩件。
- Heavy duty adjusting screw. Adjusting screw is both slotted and knurled. 重型调节螺丝。调节螺丝既有槽也有花纹边。
- Remove adjuster lever, adjuster screw and spring. 拆卸调整器杆,调整器螺丝和弹簧。
- J. Vertical Shaft Fine Adjustment Screw. 垂直杆微调螺丝.
- To replace seat/ stem module shut off supply, loosen locknut and back off adjusting screw. 要更换阀座/杆模块,先关闭供应管道,松开锁紧螺母,退出调节螺丝。
- Loosen the adjustment screw, and adjust the length of the link rod. 请拧松调整螺丝,拔出或插入连接杆进行调整。
- To replace seat/stem module shut off supply, loosen locknut and back off adjusting screw. 要更换阀座/阀杆模块,先关闭供应管道,松开锁紧螺母,退出调节螺丝。
- Tighten adjustment screw to 3 N·m (30 in-lbs) torque. 拧紧调整螺丝到3 N·m (30 in-lbs)扭力。
- Lubricate adjuster screw threads and pivot with spray lube. 使用喷雾润滑油润滑调整器螺丝螺纹和枢轴。
- Two adjusting screws harmonise the guns with the sight. 有两个调节钮来校准武器和瞄准具。
- My company mainly produces: Steyr 91 series, Hongyan series and the series of semi-trailer arm adjustment, the thrust rod, foot brake and steering assembly joint assembly. 我公司主要生产:斯太尔91系列、红岩系列和半挂车系列的各种调整臂、推力杆、刹车蹄总成和转向接头总成。
- Firmly screw can on adapter, and turn the flow adjustment screw. 将料罐倒置与喷枪连接,旋转打开流量阀,调节流量。