您要查找的是不是：
- The brazed joint after surfacebrazing coating or spraying can with stand elevated temperature environment. 钎料接头经表面钎涂或喷涂处理后可胜任高温工作条件。
- Brazed Joint - This type of joint has long been used wherever and whenever critical situations have been encountered in copper piping. 铜焊连接-在铜管道可能遇到紧急情况的地方和时候，就需要用到这种连接方式。
- For acquiring good properties of brazed joint of coal cutter,the effect of tempering temperature on microstructure and shearing strength of brazed joint was studied. 为提高采煤机用截齿钎焊接头的抗剪强度,研究了钎焊后回火温度对钎缝显微组织和剪切强度的影响。
- The affect of BCu93P and BAg45CuZn on braze joint of AgNi contact material and H62 with resistance brazing is studied. 采用电阻钎焊工艺,研究BCu93P钎料和BAg45CuZn钎料对AgNi触头材料和H62钎焊接头的影响。
- In the paper,the technology and equipment of furnace brazing for AL alloy radiator are introduced.The property of brazed joint is analyzed. 介绍了一种铝散热器的钎焊工艺和设备，并对钎焊接头性能进行分析。
- Spreadability,microstructures and mechanical properties of brazed joints of silver filler metals with different content of gallium were studied. 研究了不同镓含量银钎料的铺展性能、钎缝力学性能以及钎料的显微组织变化规律。
- Analysis of transformation-diffusion brazed joint 相变-扩散钎焊工艺焊接接头缺陷分析
- The effects of brazing temperature and time on the structure and property of the brazed joint between graphite and TZM alloys with Ti-based filler in vacuum were presented. 研究了钛合金真空钎焊石墨与TZM合金过程中,钎焊温度和时间对钎焊接头组织和性能的影响。
- Based on the results of the stress redistribution, factors affecting the strength of stainless steel brazed joints at high temperature are discussed. Optimized joint types for design are recommended. 以接头蠕变应力再分布为依掘，参数化分析了不锈钢钎焊接头的高温强度的影响因素，并给出了接头设计的优选形式。
- So，in order to gain good brazed joint in contact reactive brazing，the orientation o f the eutectic liquid must be taken into account during selecting an interlayer. 而在接触反应钎焊的中间层材料选择过程中，考虑接触反应液相产生的方向性是发挥接触反应钎焊 优越性的保障。
- The changing rule of brazed joints strength and microstructure of silver filler metal bearing different content of gallium were studied by way of analyzing microstructures of brazed joints. 分析了不同含镓量银钎料及其钎缝的显微组织，结合钎料成分及能谱分析结果，研究了钎料、钎缝的显微组织与其力学性能的关系。
- The EDX results confirmed that the brazing process were accomplished well because elements of fillermetal foil are distributed equally and dispersedly, which could consolidate the brazed joint. 能谱分析表明，钎料中的金属元素在钎缝中均匀、弥散分布，未发现有某一元素的积聚，说明钎焊过程充分完成，而且钎缝合金化程度高，对钎缝有一定的强化作用。
- The Microstructure of Brazed Joint of Doped Graphite and Copper 掺杂石墨与铜钎焊的显微组织
- Analysis of the microstructure of the electron beam brazed joint 电子束钎焊接头组织分析
- The delays put the whole schedule out of joint. 一再的拖延打乱了全部安排。
- Research on brazed joint brazability of contactor finger 触头感应钎焊钎着率的研究
- Effect of Ausforming on the Strength of Brazed Joint of Coal Cutter 形变热处理对截齿钎焊接头强度影响的研究
- She fell and put her knee out of joint. 她摔得膝关节脱臼了。
- The doctor put his bone into the joint again. 医生使他的骨头复位。
- Take a seat, have a cigarette or a joint and I will be back in three minutes. 请坐，抽根香烟或大麻烟，我三分钟内就回来。
