您要查找的是不是:
- hand brake pull rod guide anchor 手制动拉杆吊
- hand brake pull rod chain 手制动拉杆链
- hand brake pull rod guide 手制动拉杆导架
- hand brake pull rod jaw 手制动拉杆头
- hand brake pull rod 手制动拉杆
- brake pull rod 制动杆
- Loosen the adjustment screw, and adjust the length of the link rod. 请拧松调整螺丝,拔出或插入连接杆进行调整。
- The high step moves from under the adjusting screw. 使高点从调节螺钉下移动。
- The adjusting screw rests on the high step of the cam. 调节螺钉落在凸轮高点上。
- To Readjust- Loosen lock nut on the adjusting screw. 重新调节:松开调节螺丝上的锁定螺母。
- The pull rod is screwed into the inside thread of the anchor head. 将拉杆旋入锚头内的丝扣。
- To Readjust - Loosen lock nut on the adjusting screw. 重新调节:松开调节螺丝上的锁定螺母。
- Mechanical mandrel, axially actuated via machine pull rod. 机械夹紧心轴;通过机床拉杆轴向操纵.
- Remove compression from spring by turning adjusting screw (1) counterclockwise. 通过反时针方向旋转调节螺丝(1)从弹簧上拆卸压缩件。
- Aileron servo pull rod should be vertical to the shaft of aileron basically. 副翼舵机拉杆应基本上垂直于副翼转动轴线。
- Heavy duty adjusting screw. Adjusting screw is both slotted and knurled. 重型调节螺丝。调节螺丝既有槽也有花纹边。
- Below the fuselage----Make and Install Elevator pull rod and collet. 机身下面-升降舵拉杆及夹头的制作与安装。
- hand brake drive rod adjusting fork 手制动器驱动杆调整叉
- Remove adjuster lever, adjuster screw and spring. 拆卸调整器杆,调整器螺丝和弹簧。
- J. Vertical Shaft Fine Adjustment Screw. 垂直杆微调螺丝.