您要查找的是不是：
- A Study on Bottom Side Alignment Technique in Lithography 底面对准曝光中的对准技术研究
- Using DSP to achieve image acquisition and processing in the bottom side alignment system DSP实现双面光刻底面对准系统中的图像采集与处理
- bottom side alignment 底面对准
- The side or surface that is underneath; the bottom side. 下面; 底面在下的面或表面; 底面
- Mark of "HR" is stamped on its bottom side. 地板侧面有钢印标志“HR”。
- He turned the box over to examine the bottom side. 他把那个盒子翻过来对底面进行检查。
- The side or surface that is underneath;the bottom side. 下面；底面在下的面或表面；底面
- A three-dimensional border on the bottom side of the rectangle. 该矩形底边的三维边框。
- Side alignment section of one hand adjustment operation ensutes quick set up and precise box travelling. 侧定位部操作简便有效,确定盒坯输送精确。
- Figure 3. Bottom side of a plastic stencil, showing undercut features to sit over board components. 塑胶底侧，有砍口，可以盖在电路板元件上。
- Its bottom side also has supporting points and its northeastern end is connecting with the hill massif. 如果将三块碑材叠将起来，总高度可达78米，总重量为31167吨，堪称绝世碑材。
- Comparative experiments were conducted to investigate the metallurgical, effects of top, bottom side and bottom argon blowing techniques. 为考察顶吹氩、侧吹氩及底吹氩的冶金效果，分别进行了三种吹氩工艺的对比试验。
- Low solids flux for surface mount assemblies designed to help reduce skips on bottom side surface mount pads. 用于表面安装组件的低固态物焊剂,有助于减少表面安装焊盘底侧的遗漏现象。
- Body: Hardcoat Anodized, precision machined mounting surface with tapped hole accessible from bottom side. 身体：硬膜阳极氧化，精密加工与螺纹孔安装从底部可接近表面。
- If a cover design-time to set aside the bottom side of the head, burrs, and sizes, this behavior completely avoidable. 如果在封面设计时留出天头，地脚的毛边尺寸，这种现象完全可以避免的。
- Set in the adhesive viscoelasto, used in the production process is how you will cause a large head, the bottom side of the hemomediastinum. 而在无线胶黏订生产工艺中，采用上述操作，就会产生很大的天头、地脚破口。
- Two trapezoids are the same in shape and hold a common winding as the bottom side, while the midpoint of the common winding is the ground of four phase systems. 2个梯形形状相同，并具有共同的底边，其中点为四相系统的公共点。
- Exact Solution of Side Alignment of Subgrade in Transition Curve 缓和曲线内外侧路基边缘线的精确求解
- Principle and Adjusting of Air Driven Side Align Gauge 气动式侧拉规工作原理与调节
- The simulation results show that the filmworks as a collimating layer when the light incident from bottom side of cone and as ascattering layer while the light incident from tip side. 模拟计算结果表明，当光从微锥的底部人射时，该膜起到准直作用，当光从微锥的顶部入射时，该膜起到散射作用。
