您要查找的是不是：
- This decision is based, in part, on the tool's design, bond properties, material to be cut and machine power. 这一决定是根据在某种程度上对工具的设计、债券性质,可节省材料和机动力。
- The compositions, structures, bonding properties of the precursor, the HT-HP products and CN coating have been characterized by EDX, XRD, SEM and FTIR. 采用了X射线能谱(EDS)、X射线衍射(XRD)、扫描电子显微镜(SEM)、傅立叶变换红外光谱(FTIR)等分析手段,对所获得的前驱物、高压产物和碳氮(CN_x)涂层的成分、晶体结构和价键结构等性质进行了分析;
- The melting point is a mains quality index of heat melts adhesives.And the bonding properties are influenced by the melting point and melting range. 熔点是衬布用热熔胶的一项主要指标,对粘接性能的体现有着重要的影响。
- The article discussed factors effecting the bonding properties of waterborne polyurethane laminating adhesives and studied the affecting patterns of these factors. 探讨了影响水性聚氨酯复膜胶粘接性能的各种因素,并对它们的影响规律做了初步研究。
- Butadiene-arylonitrile rubber was added to the homopolyvinyl acetate resin, modified its brittleness of low temperature ambient and bonding properties for plasties or rubber. 通过在均聚醋酸乙烯树脂中加入了腈橡胶以改善其在低温环境下的脆性和对塑料、橡胶等的粘接性能。
- The compositions, structures, bonding properties and thermal stabilities of the precursor and the treated products have been characterized by elemental analysis, EDX, XRD, SEM, TEM, SAED, FTIR, TG. 采用元素分析、EDX、XRD、SEM、TEM、SAED、FTIR、TG检测手段，分析了前驱物以及脉冲放电产物的成分、结构、价键状态、热稳定性等方面的特性。
- High performance ferrocement laminate (HPFL) is a new type of inorganic material with a series of advantanges such as high strength,small shrinkage and good bonding properties,etc. 高性能水泥复合砂浆薄层(HPFL)是一种新型的无机材料，具有强度高、收缩小、与混凝土粘结性能好等一系列优点；
- Gypsum board to enhance network, applied to large-scale production of gypsum board needs a good bond positioning, and better water-soluble, with the gypsum board has a very good bonding properties. 石膏板增强网，运用于大面积石膏板生产需要，具有良好的粘结定位性，较好的水溶性，与石膏板有很好的粘结性能。
- In comparision with the bonding properties of glued air-dried China fir wood, a more satisfactory result can be obtained in green wood gluing by using PRF and RF glues, but not for UF and MF glues. 4. 3．与杉木气乾材之胶合性能相比较，PRF、RF进行杉木生材胶合，可获得较佳之结果，而UF、MF则否。
- OFBG-FRP bar was pultruded with the fiber strands and optic fiber bragg grating sensor, helically wound fiber strands was introduced to bars to improve the bond properties between OFBG-FRP bar and concrete. 在纤维增强聚合物Fiber Reinforced Polymer(FRP)筋拉挤工艺中;将光纤布拉格光栅Optic FiberBragg Grating(OFBG)传感器与普通纤维束一起经过拉挤模具;为改进FRP筋与混凝土的粘结性能;在FRP筋表面螺旋缠绕纤维束;制备了智能OFBG-FRP筋.
- The results showed that PUF not only had the outstanding mechanical properties but also had good interfecial bond property. 实验结果表明,该泡沫材料不仅具有良好的力学性能,而且具有普通硬质聚氨酯泡沫所没有的良好界面粘接性能。
- Abstract: In this paper, the workmanship of reactive sintering of thermal spray coating, microstructure and bonding property are introduced. 文摘:介绍了热喷涂层的中温反应烧结工艺，及其组织结构的特点和涂层结合性能。
- This paper discussed how the different groups, such as -CN,-COOH,-CONH2，-C6H5 and -OH ect.influencing the bonding property of acrylic adhesives. 介绍了通过共聚分别把-CN、-COOH、-CONH2、-C6H5、-OH等基团引入丙烯酸酯大分子链中，研究了这些基团分别对丙烯酸酯胶粘剂剥离强度和内聚强度的影响。
- In this paper, the workmanship of reactive sintering of thermal spray coating,microstructure and bonding property are introduced. 介绍了热喷涂层的中温反应烧结工艺，及其组织结构的特点和涂层结合性能。
- The comparison of the bonding property between S_4~2+ , Se_4~2+, Tel_4~2+ , Bi_4~2+ with the plane square geometry and the butterfly geometry was performed. 讨论了平面正四边形S_4~(2+)、Se_4~(2+)、Te_4~(2+)和Bi_4~(2-)簇离子与蝴蝶形四核原子簇在成键性质上的不同。
- The initiating capability of preirradiated styrene and/or butylacrylate and the effects of preirradiation dose on the bonding property of adhesives are investigated. 研究了预辐照苯乙烯和丙烯酸丁酯的引发能力、不同预辐照剂量与接枝率及粘接性能的关系。
- Pullout tests were carried out to investigate the mechanism of influence on the bond property and uplifit resistance of bolts in terms of corrosion and its position. 基于拉拔试验，研究了锈蚀及锈蚀部位对锚杆极限抗拔力和黏结性能的影响机理。
- You need a strong adhesive to bond wood to metal. 需要强力胶才能把木料粘在金属上。
- This glue makes a good firm bond. 这种胶水粘得很结实。
- Common tastes form a bond between the two men. 共同的爱好使两人结交为朋友。
