您要查找的是不是:
- bonded composite coating 复合涂层
- The results show that the composite coating is metallurgically bonded to the substrate and the microstructure is fine and uniform. 结果表明,复合材料涂层与基体形成良好的冶金结合,微观组织细小、均匀;
- The paper present the new developments of Ni-W coat, Ni-W-B coat, tungsten composite coat and tungsten brush coat etc. 介绍了镍钨镀层、镍钨硼(磷)镀层、含钨复合镀层和含钨电刷镀镀层等的研究与开发的近期进展。
- By using sub -overquenching and ann ealing methods,the effect of quench ing rates on the microstructure and the magnetic pro perties of(Nd,Pr ) 10.5 (FeCoZr ) 83.5 B 6 bonded composite magnets with low rare -earths content was investi gated. 采用部分过快淬加后续晶化退火处理工艺;研究了快淬速度对低稀土含量双相复合(Nd;Pr)10.;5(FeCoZr)83
- A. Megueni, B. Bachir Bouiadjra, and M. Belhouari, “Disbond effect on the stress intensity factor for repairing cracks with bonded composite patch”, Computational Material Science 29, 407 (2004). 黄豪义;脱层应力强度因子之计算方法;国立成功大学航空太空学系硕士论文;(2006).
- The results show that multiplayer Ni-Cr 2O 3 composite coating have a strong wear resistance. 结果表明 ,电刷镀多层Ni-Cr2 O3复合镀层具有良好的耐磨性。
- Based on this work, interlayer shielding composite coating gains more SE than 52dB between 3OMHz-I000MHz planewave. 在此基础上制备的层状复合屏蔽涂料获得了30MHz-1000MHz频段SE分贝值超过52dB的成果。
- Microstructure of the ceramal composite coating was characterized by SEM,XRD and EDS. 利用SEM、XRD和EDS等分析了涂层的显微组织和相组成;
- The ceria content of the nanocomposite coating is more than that of the micron composite coating. 纳米复合涂层中氧化铈的含量高于微米复合涂层中的氧化铈含量;
- The anti-cracking performence of the composite coating with nonwoven fabric was discussed in the article. 对用非织造布增强的复合腻子层的抗裂纹性能进行了研究。
- Hue of the ceramic veneer, ceramic materials and bond composites had greater influence than that of dentition. 结果表明 ,瓷材料和粘结树脂材料的色调对整体效果的影响最大 ;
- Using stiring and ultrasonic dispersing,nano-SiO_2 composite coating was obtained by adding nano-SiO_2 into varnish. 在机械搅拌和超声场的共同作用下,将改性纳米二氧化硅分散到醇酸清漆中,获得纳米二氧化硅复合涂料。
- Arc sprayed aluminium composite coating can increase the service life of reaction caldron up to the design life. 采用电弧喷涂铝复合涂层来解决反应釜的腐蚀问题,可使其达到或超过设计寿命。
- Antiwear mechanism and wear performances of electric brushing coating multiplayer Ni-Cr 2O 3 composite coating are tested and studied. 研究了电刷镀多层Ni-Cr2 O3复合镀层的磨损特性与磨损机理。
- The producing and using status of the raw material powder system of every cermet composite coating technique has been reviewed. 金属陶瓷复合涂层技术作为重要的材料表面处理技术和材料复合技术能够制备各种特殊功能的涂层材料。
- Therma fatigue behaviors of Ni base alloy chromium carbide composite coating made by a vacuum fusion sintering method are discussed in this paper. 研究了用真空熔烧法制得的镍基合金-碳化铬复合涂层的热疲劳行为。
- The result showed that the composite coating was in low internal stress, high microhardness under the dispersing strengthened effect of nanodiamond. 结果表明,纳米金刚石的弥散强化作用,可有效改善镀层的生长、减小内应力,提高镀层的显微硬度。
- You need a strong adhesive to bond wood to metal. 需要强力胶才能把木料粘在金属上。
- It was found that the Ni-P-(IF-WS_2) composite coating exhibited both higher wearresistance and lower friction coefficient than Ni-P electrolesscoating. 研究结果表明Ni-P-(IF-WS_2)复合镀层比Ni-P镀层具有更高的耐磨性能和更低的摩擦系数。
- This glue makes a good firm bond. 这种胶水粘得很结实。