您要查找的是不是:
- Curve fitting method of bond stress distribution in steel bar pullout test 钢筋拉拔试验中粘结应力分布的曲线拟合
- Experimental Research on the Bond Stress Distribution of Deformed Reinforcement in the Lightweight Reinforcement Concrete 轻骨料混凝土中变形钢筋粘结应力分布试验
- bond stress distribution 粘结应力分布
- Analyses of the stress distribution on the coating/substrate interface indicated that significant errors would be introduced if this test standard were used to determine coating shear bond strength. 通过对涂层/基体交界面上的应力分布的分析表明,采用这一试验方法测定涂层剪切结合强度将会造成较大的误差。
- Therefore this paper aims to propose a methodology to account for the effect of pullout tests on the bond stress. 为此,在土钉抗拔试验结果的基础上,提出了采用贝叶斯理论来估计粘结强度的新方法。
- Moreover, the 3D stress distribution is more undulant than the 2D one. 相对而言,三维的应力分布曲线起伏较大。
- The updated mean bond stress is higher than the prior value when all pullout tests do not conduct to failure. 当抗拔试验都未做至土钉破坏时,更新的粘结强度均值大于先验的均值;
- The conventional design approach of soil nails often results in an underestimation of bond stress, which in turn gives an uneconomical design. 摘要传统的土钉设计方法经常低估了土钉的粘结强度,从而导致了不经济的设计。
- The conventional design approach of soil nails often results in an underestimation of bond stress,which in turn gives an uneconomical design. 传统的土钉设计方法经常低估了土钉的粘结强度,从而导致了不经济的设计。
- This method depends on determining the change in stress distribution within the model when it is turned upside down. 倒置法的依据是在模型倒置时测定模型内应力分布的变化。
- Three dimensional distribution of bonding stress, displacement and electric potential are presented. 对被动控制、主动控制、主被动控制的控制效果进行了研究;
- The effect on the stress distribution will be negligible except in the immediate vicinity of such points. 除了紧靠荷载作用点的区域以外,上述影响均可以忽略不计。
- We defined the conditions of the plane stress distribution of thin plates subjected to in-plane forces. 我们定义了承受平面力的薄板平面应力分布条件。
- Stress distribution is determined in a thin conductive plate containing an elliptic hole under the external electromagnetic loads. 摘要给出一种针对含椭圆孔的导电薄板在电磁力作用下的分析方法。
- The phonon field and phason field stress intensity factors and stress distribution at the crack tips are also given. 进一步可以求得裂纹尖端的声子场和相位子场的应力强度因子,由这些应力强度因子求解了裂尖处的声子场和相位子场的应力分布。
- In chapter 6 , the bond mechanisms and influential factors to FRP and concrete , mortar , resin are discussed . The bond stress, the stress of FRP and embedment length are also dealt with . 第六章论述了纤维增强塑料筋与混凝土、砂浆和树脂的粘结机理及影响因素,讨论了粘结应力、纤维增强塑料筋应力及锚固长度的计算方法,设计了用树脂、砂浆分段锚固纤维筋的复合锚固系统,以克服树脂在长期性能方面的不足。
- Finite element analysis has been used to calculate the stress distribution in crystals grown by the Bridgman method. 本文用有元分析法计算了 Bridgman 法生长的晶体中的应力分布。
- Objective: To analyse the difference of the stress distribution during mandible to be forced at the midline. 目的:分析不同年龄的下颌骨正中受力时,下颌骨三维有限元分布的差异。
- Conclusion:The established model may be used for the stress distribution of MCD. 结论:该模型可用于上颌全口义齿应力分布研究。
- With similar index, model test’s results predicts antetype structure’s stress distribution. 把模型试验的结果按照相似指标推算出原型结构的应力分布。