您要查找的是不是:
- blending melt grafting 熔融接枝
- The melt grafting of itaconic acid (IA) onto low-density polyethylene (LDPE) was initiated by dicumyl peroxide (DCP) in a twin screw extruder. 以过氧化二异丙苯(DCP)为引发剂,在双螺杆挤出机中制备了衣康酸(IA)熔融接枝低密度聚乙烯(LDPE)。
- The rheological behaviour of the LDPE/EPDM blend melt with blowing (or foaming) agent AC and cross -link agent was studied in this paper. 探讨了交联剂过氧化二异丙苯对低密度聚乙烯/三元乙丙橡胶(LDPE/EPDM)共混料流变行为的影响。
- The melt grafting of maleic anhydride(MAH) and styrene(St) onto atactic polypropylene(aPP) was carried out by means of a single-screw extruder. 本文研究采用熔融法将马来酸酐(MAH)和苯乙烯(St)双单体接枝到自制的高分子量无规聚丙烯弹性体以制得接枝共聚物aPP-g-(St-MAH),这是一种具有增容与增韧双重功能的新型增容剂,亦称增容增韧剂,讨论了反应温度、引发剂浓度、单体浓度、St与MAH摩尔比率以及反应时间对接枝反应的影响。
- The melt grafting of maleic anhydride (MAH) onto linear low density polyethylene(LLDPE) was initiated by dicumyl peroxide(DCP) in a twin screw extruder. 以过氧化二异丙苯(DCP)为引发剂,在双螺杆挤出机中进行了马来酸酐(MAH)熔融接枝线性低密度聚乙烯(LLDPE)的研究,用红外光谱表征了接枝反应的存在。
- The melt grafting of glycidyl methacrylate(GMA) onto ethylene propylene diene monomer(EPDM) using dicumyl peroxide(DCP) as an radical initiator was carried out. 以甲基丙烯酸缩水甘油酯为接枝单体、过氧化二异丙苯为引发剂对三元乙丙橡胶(EPDM)进行熔融接枝。
- The melt grafting of glycidyl methacrylate (GMA) onto ethylene propylene diene monomer (EPDM) using dicumyl peroxide (DCP) as an radical initiator was carried out. 摘要以甲基丙烯酸缩水甘油酯为接枝单体、过氧化二异丙苯为引发剂对三元乙丙橡胶(EPDM)进行熔融接枝。
- The melt grafting of maleic anhydride (MAH) onto ethylene propylene diene mischpolymere (EPDM) was carried out via reactive extrusion by twin screw extruder. 用同向双螺杆挤出机,对三元乙丙共聚物(EPDM)进行熔融接枝马来酸酐(MAH),考察了单体、引发剂(DCP)用量和加工条件对接枝率的影响。
- Through the melt grafting of maleic anhydride (MAH) onto fluororubber (FKM), we can prepare the grafting FKM (FKM-g-MAH) to improve FKM and TPU compatibility of two phases. 由FTIR可以发现,在FKM熔融接枝物上有两个酸酐基团的特征峰,因此表明FKM-g-MAH接枝聚合物的生成。
- The processes and equipments of melt graft, solvent graft, solid phase graft, UV radiate graft, supercritical CO_2 graft and solid-phase mechanochemistry graft were introduced. 分别介绍了熔融接枝、液接枝、相接枝、外光辐射接枝、离子体接枝、临界二氧化碳接枝的工艺及设备的开发情况。
- The processes and equipments of melt graft,solvent graft,solid phase graft,UV radiate graft,supercritical CO_2 graft and solid-phase mechanochemistry graft were introduced. 分别介绍了熔融接枝、溶液接枝、固相接枝、紫外光辐射接枝、等离子体接枝、超临界二氧化碳接枝的工艺及设备的开发情况。
- The effects of the mechanical properties, the resistance to solvent and heat stability of TPV ware investigated by analyzing the modification of nano-silica and MAH/St/DCP multi-monomer melt grafting & cross-linking. 研究了纳米SiO2 改性和马来酸酐/苯乙烯/过氧化二异丙苯 (MAH/St/DCP)多单体熔融接枝、交联改性对TPV 力学性能、耐溶剂性能和耐热性能的影响。 结果表明: MAH/St/DCP“就地”接枝、交联改性NR/PP/纳米SiO2 TPV 的力学性能最好,耐 溶剂性能和热稳定性最佳。
- Melt the butter and then blend in the flour. 先把黄油融化,然後加入面粉。
- With benzoyl peroxide (BPO) as an initiator, the graft copolymerization of ethylene/vinyl acetate copolymer (E/VAC) with maleic anhydride (MAH) was investigated by melt grafting in Brabender plasticorder. 以过氧化苯甲酰 (BPO)为引发剂 ,通过熔融接枝法在Brabender转矩流变仪中制得马来酸酐接枝 (乙烯 /乙酸乙烯酯 )共聚物 [(E/VAC) g MAH]。
- SBS was grafted with reactive monomor GMA by melt grafting, and SBS-g-GMA was obtained. 采用活性单体甲基丙烯酸缩水甘油酯(GMA)对(苯乙烯/丁二烯/苯乙烯)嵌段共聚物(SBS)进行熔融接枝,制备了GMA接枝SBS(SBS-g-GMA)。
- SEM photographs show the dispersibility of MST in LDPE is enhanced with the decrease of starch granules size.Rheological analysis shows that MST/LDPE blend melts are pseudoplastic fluid. 流变学分析表明,MST/LDPE共混体系熔体为非牛顿假塑性流体,随着淀粉粒度的降低,熔体非牛顿指数减小,但粘度变化不显著。
- STUDY ON FLOW PROPERTIES OF LDPE/LLDPE BLEND MELT IN EXTRUSION LDPE/LLDPE共混物熔体挤出流动性的研究
- Study on the Melt Grafting of GMA onto EPDM GMA熔融接枝EPDM的研究
- The curtains blend in perfectly with the furniture. 窗帘(的颜色)跟家具(的颜色)十分和谐。
- Keywords PA6;LDPE;blending melt spinning;unfigured islands-in-sea fiber; 共混熔融纺丝;不定岛型海岛纤维;