您要查找的是不是:
- The connecting rod may drive a valve stem directly. 連桿可以直接帶動閥門的把柄。
- Replaceable hose filter and valve stem seals for field reliability. 可更換軟管過濾器和閥門閥桿密封,使得現場應用可靠行更高。
- For removal of valve stem seal and lower valve spring guide. 可用於拆卸汽門油封或降低汽門彈簧。
- Clean exposed portion of valve stem (Do not scratch). 清洗閥桿的外露部分(不要划傷)。
- A valve stem has broken off and effectively seized up the engine. 閥桿折斷了,有效地阻止了發動機的運轉。
- Valve stem 412 is dimensioned to attach to diaphragm 414, best seen in FIG. 2. 從圖二可見,閥桿412設計成能與隔膜414接合。
- Pack a valve stem. 紮好活門塞
- Inspect for scuffed or bent valve stems. 檢視氣門桿是否擦傷或彎曲。
- A tire tool or flat stock can be used to pry one part of the bead up over the rim flange( start near the valve stem). 可用輪胎工具或扁平的撬棒把輪緣的一端從輪輞輞圈上撬起。
- In a single-stage regulator, delivery pressure increases as cylinder pressure decays, because there is less gas pressure exerted on the valve stem. 在單級調整器里,輸出壓力隨鋼瓶壓力的減小而增大,這是因為施加在閥門系統上的氣體壓力減小了。
- The valve is switched on or off with difficulty. Please clear the paint on the valve stem and add some lubricant. 閥件開關太困難,請清除閥桿上的油漆並加潤滑劑。
- Turn the valve stem counterclockwise until the valve is fully open and will not turn any further. 逆時針旋轉閥桿直到閥門全開為止,不要旋轉過度。
- The valve stem with its grooved rings and positioning sleeve indicates the throttled position of the valve. 閥桿及其溝槽環和定位套筒顯示閥門的節流位置。
- In all designs, the valve stem normally serves as a piston rod with disc fastened directly to them. 在所有結構中,閥桿通常作為活塞桿,閥瓣直接固定在閥桿上。
- Loosen and remove the diaphragm lock nut and lock washer, pressure plate and diaphragm from the valve stem. 鬆開和拆卸隔膜鎖緊螺母和鎖緊墊圈,從閥桿上往下壓閥盤和隔膜。
- The leading option, already offered on some models, is a sensor housed in a fob inside a tire, behind the valve stem. 最佳的選擇就是,將偵測器設在活門桿後方、車胎內側的傳送器中,這個方法現在已經正在使用。
- Slight tapping with a mallet may be required, but do not change the valve stem position. 如果需要,用木槌輕輕敲打,但是不要改變閥桿位置。
- A tire tool or flat stock can be used to pry one part of the bead up over the rim flange (start near the valve stem ). 可用輪胎工具或扁平的撬棒把輪緣的一端從輪輞輞圈上撬起。
- Taper screw thread for valve stem and cylinder neck assembly.Nominal diameter 16,4, taper 3/20, 14 TPI si. 氣瓶.;氣瓶閥門頸裝配錐螺紋
- These sets consist of a coupling which attaches to standard valve stem and an extension rod. 這些裝置由可連接標準閥門閥桿的聯結器和加長桿組成。