您要查找的是不是：
- Pressure Seal Swing and Tilting Disc Check Valves. 節能梭式止回閥。
- Tilting Disc Check Valves Product Line. 翻轉式閥瓣止回閥產品系列。
- The Pacific tilting disc check valve uses gravity to rapidly close the disc upon reversal of flow. 美國太平洋翻轉式閥瓣止回閥在出現逆流時利用重力迅速關閉閥瓣。
- This tilting disc check valve is designed for high piping velocities, turbulence flow, quick and quiet closing preventing "water hammer". 這種翻轉式閥瓣止回閥結構適用於管道流體流速很高,具有湍流,需要快速和安靜關閉以防止「水錘」的場合。
- Tilting disc check valves are used to prevent reversal of flow in horizontal or vertical pipe lines. 翻轉式閥瓣止回閥適用於防止水平或垂直管路上的流體倒流。
- Tilting Disc Check Valves consist of a cylindrical housing, with a pivoted circular disc. 翻轉式閥瓣止回閥由圓柱形外殼及轉動圓盤閥瓣構成。
- Typical Tilting Disc Check Valve 典型翻轉式閥瓣止回閥
- Tilting Disc Check Valve Features 翻轉式閥瓣止回閥特點
- Our Tilting Disc Check Valves are designed for quick opening and closing in severe service applications and the elimination of water hammer. 我們的翻轉式閥瓣止回閥專用於在嚴酷的應用環境下迅速開啟和關閉,避免出現水錘現象。
- Tilting Disc Check valves are similar to swing check valves. In most installations, slamming is minimized upon reversal of flow so noise and vibration are reduced. 翻轉式閥瓣止回閥與旋啟式止回閥類似。對於大多數安裝的翻轉式閥瓣止回閥,由於流體倒流造成的撞擊程度最小,因此噪音和振動也有所減小。
- Tilting disc check valves have to close rapidly since the disc has a shorter distance to travel and therefore arrives at the seat faster...minimizing a slam. 翻轉式閥瓣止回閥能夠迅速關閉，這是由於閥瓣的運行距離很短，因此能夠迅速到達閥座位置，從而最大限度減小撞擊現象。
- Cast Steel Tilting Disc Check Valves 鑄鋼翻轉式閥瓣止回閥
- Pressure Seal Tilting Disc Check Valves Forged Carbon, Alloy or Stainless Steel 螺栓閥帽翻轉式止回閥鍛造碳鋼、合金鋼或不鏽鋼
- Pressure Seal Swing and Tilting Disc Check Valves Forged Carbon, Alloy or Stainless Steel 壓力密封旋啟翻轉閥瓣止回閥鍛造碳鋼、合金鋼或不鏽鋼
- Flow coefficients at other than fully open may be approximated by use of the characteristic flow curves for tilting disc check and globe valves. 不是全開狀態的流量係數可以採用適用於提升式閥瓣止回閥和截止閥的流量特性曲線進行估算。
- NOTE: Twin Disc Check Valves can be installed horizontally or in the vertical position with flow up. 注意:雙閥瓣止回閥水平安裝,或在流向朝上時垂直安裝。
- This is especially true with slow response valves such as swing and titling disc check valves. 有些反應緩慢的閥門，如旋啟式止回閥和翻轉式閥瓣止回閥，經常會因此而損壞。
- Twin Disc Check Valves can be installed horizontally or in the vertical position with flow up. 雙閥瓣止回閥可以安裝在水平位置,或流向朝上的垂直位置。
- TILTING DISC CHECK DESIGN FEATURES 翻轉式閥瓣止回閥結構特點
- Check valve guiding shall be plastic to plastic. 止回閥引導裝置應該是塑料對塑料。
