您要查找的是不是:
- throttle adjusting screw 風門調整螺釘
- Loosen the adjustment screw, and adjust the length of the link rod. 請擰松調整螺絲,拔出或插入連接桿進行調整。
- Remove adjuster lever, adjuster screw and spring. 拆卸調整器桿,調整器螺絲和彈簧。
- The high step moves from under the adjusting screw. 使高點從調節螺釘下移動。
- J. Vertical Shaft Fine Adjustment Screw. 垂直桿微調螺絲.
- The adjusting screw rests on the high step of the cam. 調節螺釘落在凸輪高點上。
- Tie-Rod of Marble Gang Saw with hydraulic driven is for connecting hydraulic tensioner and saw blade. It composes of Rear Tie-Rod, adjust screw and wedge. 大理石框架鋸液壓鋸夾用於連接液壓漲緊器和鋸條,它由前後鋸夾,蝴蝶板、插板和調整螺桿組成。
- Tighten adjustment screw to 3 N·m (30 in-lbs) torque. 擰緊調整螺絲到3 N·m (30 in-lbs)扭力。
- To Readjust- Loosen lock nut on the adjusting screw. 重新調節:鬆開調節螺絲上的鎖定螺母。
- Lubricate adjuster screw threads and pivot with spray lube. 使用噴霧潤滑油潤滑調整器螺絲螺紋和樞軸。
- To Readjust - Loosen lock nut on the adjusting screw. 重新調節:鬆開調節螺絲上的鎖定螺母。
- Firmly screw can on adapter, and turn the flow adjustment screw. 將料罐倒置與噴槍連接,旋轉打開流量閥,調節流量。
- Add fine adjust device for the pressure of foot,without dial on the adjustable screw, more convenience for operation. 壓腳壓力採用微調裝置,壓力調節螺釘設有刻度,更加方便操作。
- Remove compression from spring by turning adjusting screw (1) counterclockwise. 通過反時針方向旋轉調節螺絲(1)從彈簧上拆卸壓縮件。
- A pinion shaft, the rack shaft, and a rack guide holder are assembled in a housing, and an adjust screw is strongly tightened to press the rack guide holder toward the rack shaft under an overload. 齒輪軸、齒條軸和齒條導向支架安裝於殼體內,並且調節螺桿在載荷作用下非常緊地將齒條導向支架壓向齒條。
- Keeping well away from the propeller, adjust the engine to maximum rpm with the mixture adjustment screw marked with an "H". 跟螺旋槳保持距離;推油門全開.;轉進標記"H"螺絲求取最高轉速。
- Heavy duty adjusting screw. Adjusting screw is both slotted and knurled. 重型調節螺絲。調節螺絲既有槽也有花紋邊。
- Adjustment of parallelity, adjust screw (6), you can set the parallelity between printing squeegee and ink-collecting squeegee. 平行度調整:調節螺絲(6),可調整刮墨刀、回油刀與絲網的平行度。
- To replace seat/ stem module shut off supply, loosen locknut and back off adjusting screw. 要更換閥座/桿模塊,先關閉供應管道,鬆開鎖緊螺母,退出調節螺絲。
- Two adjusting screws harmonise the guns with the sight. 有兩個調節鈕來校準武器和瞄準具。