您要查找的是不是:
- The tests show that RTV can obviously improve the threshold voltage of secondary discharge. 實驗表明RTV膠明顯提高了高壓陣二次放電閾值電壓;
- An example which uses the simulator to analysis the siatistical relation of threshold voltage of MOSFET to channel implanted dose is presented. 並用此程序分析了MOS場效應管閾值電壓與溝道注人劑量的統計關係。
- Going back to the clipping diodes now, the diodes have no effect until the signal at the output is greater than the threshold voltage of the diode. 回到剪輯二極體現在;二極體沒有影響到信號輸出大於閾電壓的二極體.
- It was concluded that charge injection and recombination would restrict the field electron emission, and increase the threshold voltage of flashover and decrease its scattering. 發生在絕緣體表層的電荷注入和複合過程能夠在一定程度上抑制場致電子發射,從而提高沿面閃絡電壓,並降低閃絡電壓值的分散性。
- The threshold voltage of the hybrid devices is about 7 V and the maximum luminace is about 62.1 cd/m~2 with the CIE coordinates of X=0.303,Y=0.32.This result shows that organic-inorganic heterostructure may be a new way to obtain white light emission. 器件的起亮電壓約7V;最大發光亮度約62.;1cd/m2;色坐標為:X=0
- Threshold Voltage of Flotox MOSFET in EEPROM EEPROM中浮柵MOS晶體管閾值電壓的研究
- The threshold voltages of n-MOSFET and p-MOSFET are 2V and 5V respectively. It can be turned off with current density of 220A/cm at a gate bias of 7V. n溝MOS閾值電壓為2V;p溝MOS閾值電壓為-5V.;當門極加-7V電壓時;其關斷電流密度為220A/cm~2
- It successfully predicts the threshold voltages of buried channel MOSFET"s with a large range of channel lengths.Also, the reducing substrate bias effects in deep-submicron devices are included. 模型反應了較寬溝長範圍內埋溝MOSFET的開啟電壓與溝長及偏置的關係,並預測了在深亞微米下襯偏效應隨溝長減小而減小的特性。
- Dimension A, center of valve port to floor level. 尺寸A,閥門埠中心至地面的距離。
- No water flows downstream of valve. 閥門下游沒有水流。
- The Threshold Voltage of The In-plane Switching Mode Liquid Crystal Display 共面轉換液晶盒的閾值電壓
- Please adjust the lift of valve plate. 請調節閥門開度。
- Lift out disc holder assembly from body of valve. 從閥體上取出閥瓣固定器總成。
- Withstanding Voltage of Output Tr. 出力迴路耐圧。
- Ball Port Options viewed from top of valve. 從閥門頂部觀察球閥埠選項。
- What is the output voltage of you system? DC or AC? 您要求系統的輸出電壓多少,直流還是交流?
- The input threshold voltage when the input voltage is falling. 在輸入電壓下降時的輸入門限電壓。
- Failure position of valve shall be closed. 故障時閥門位置為關閉.
- Maximum input voltage of +5V ( how many amp? 最大輸入電壓+5V(電流多少?
- Type of valve - gate, globe, check, etc. 閥門的類型:閘閥,截止閥,止回閥,等等。