您要查找的是不是：
- Head dresser is secured high surface rough. 高精粗糙度修整裝置。
- Table 1-2 Surface roughness and chrominance of treated wood. 表2處理材於水質環境下經長期試驗後防腐劑之保留率.......57
- Surface roughness has a profound effect on wind speed. 地表粗糙度對風速有相當深刻的影響。
- A New Noncontact Method for Rapidly Measuring Surface Roughness[J]. 引用該論文 胡克平;李田澤.
- Sandblasting to achieve the desired surface roughness. 清潔輥筒表面，邊緣倒角。
- The adding of POSS in the polymer lowered the surface roughness. 添加POSS后聚合物表面粗糙度減小。
- Effects of different preparation procedures on abutment surface roughness. 不同預備程序對基牙表面粗糙度的影響。
- Grainy edge Surface roughness on edges of web caused on the drying process. 起皺紙邊紙卷邊緣在乾燥過程所引致的起皺情況。
- Grainy edge: Surface roughness on edges of web caused on the drying process. 起皺紙邊:紙卷邊緣在乾燥過程所引致的起皺情況。
- Surface roughness of the MSD MCrA1Y coating is far lower than the one of LPPS. MSD的MCrA1Y塗層表面粗糙度遠比LPPSMCrA1Y低。
- The effect of surface roughness on the static electricity is analyzed through solving the verified Reynolds equation. Pressure flow factor and shear flow factor are included in the verified Reynolds equation. 在Reynolds方程中引入了壓力流因子和剪流因子，考慮粗糙度對超薄氣體膜潤滑的影響。
- Problems such as drill life exit burr and machined surface roughness etc. 對採用超聲波振動鑽削微小孔時鑽頭的壽命、出口毛刺和加工表面粗糙度等問題進行了研究。
- Wood surface roughness was studied by using fractal dimension method. 應用分形維對木材表面粗糙度特徵進行研究。
- Thirdly, microstrain-, peripherin-thick, surface roughness, resolution 3%. 不一是球磨砂綱，感平層不薄，暗地粗劣，解析度3%25。
- The contribution of the guide surface roughness overshadows that of the fiber surface roughness. 導紗桿表面粗糙度的作用超過纖維表面的粗糙度。
- For a good bond, an adhesive must counteract the effect of surface roughness and boundary layers. 為了取得很好的粘結，粘結劑必須能克服表面粗糙和邊界層的反應。
- Friction increases with increasing fiber surface roughness in the boundary and semiboundary. 在邊界和半邊界區內，摩擦隨纖維表面粗糙度的增加而增加。
- It can be customized with a customer demand, and consider surface roughness and polishing efficiency. 可隨客戶需求設計,兼顧加工時的面粗度及加工效率。
- Typical role: to rust, oxidation to the skin, to oil, to remove residual stress, increasing surface roughness ...... 典型作用：去銹、去氧化皮、去油、去除殘餘應力、增加工件表面粗糙度......
- Results show that this process can reach surface roughness with angstrom dimension. 結果表明,這種拋光工藝能獲得原子級的超光滑表面。
