您要查找的是不是：
- Mo alloy layer is formed by double glow plasma alloying process. 然後作固溶處理,使金屬間化合物溶於基體中;
- Evaluation on silicon alloy as non aluminothermic was carried out according to the experimental results and the characteristics of chemical heating. 根據試驗結果和鋼包化學加熱法的特點對硅系合金作非鋁發熱劑進行了評價。
- THE CALCIUM SILICON ALLOY HAS STRONG ABILITY OF DEOXIDIZING AND DESULFURIZING. IT ALSO HAS THE BEST EFECT TO IMPROVE THE PLASTICITY, IMPACT DUCTILITY AND FLUIDITY OF STEEL. 硅鈣合金具有較強的脫氧、脫硫能力。同時對改善鋼的性能,提高鋼的塑性,衝擊韌性和流動性都有良好的促進作用。
- Liu YC, Lu YL, Yang GC, Zhu ZG. Influence of cerium content on damping capacities of as-spray deposited high silicon alloy ZA27, Transactions of NFsoc 7 (1997) 111-115. 楊留栓，劉永長，龐禮軍，楊根倉，周堯和.;噴霧沉積高硅ZA27合金的摩擦磨損性能，材料研究學報，10（1996）363-367
- The etching liquid etches the gold or gold alloy layer existing between the columns evenly. 該蝕刻液均勻蝕刻柱之間存在的金或金合金層。
- Liu YC, Yang GC, Lu YL, Zhu ZG. Influence of extrusion on damping capacities of as-spray deposited high silicon alloy ZA27 modified by cerium, Acta metallurgica sinica 10 (1997) 437-444. 劉永長，楊根倉，呂衣禮.;噴霧共沉積法製備高性能金屬基複合材料的新思路，材料導報，5（1996）65-67
- The results showed that alloy layer peeling of thrust washer was mainly caused by poor adhesion between alloy layer and steel back. 結果表明，造成止推墊片合金層產生剝落的主要原因是合金層與鋼背之間的結合強度較低；
- The etching liquid etches a gold or gold alloy layer formed on the surface of a substrate for a semiconductor device or a liquid crystal device evenly. 該蝕刻液均勻蝕刻在半導體器件或液晶裝置用基片的表面上形成的金或金合金層。
- AlSr10 aluminum strontium alloy modifierPurpose:A1-Sr is applicable to metal casting, low pressure casting and hypoeutectic and eutectic aluminum silicon alloy modification with long casting time. 鋁鍶合金變質劑用途：A1-Sr適用於金屬型鑄造，低壓鑄造及澆注時間較長的亞共晶及共晶鋁硅合金的變質處理。
- The kinetics curves of alloy layer growth in hot dip aluminizing layer and corresponding equations were given with computer fitting. 根據試驗結果,通過計算機擬合給出了合金層生長動力學曲線,並建立了方程。
- According to manganese and silicon alloying of ZA27 alloy in the squeeze casting,a highstrength,high wear resistant ZA27 alloy with reasonable plasticity was obtained. 通過對ZA27合金的錳、硅合金化研究，獲得了具有一定塑性的高強度耐磨鋅鋁合金。
- Phase constitutions in the Fe-Al alloy layer of the calorized steel pipe are researched by means of microscopy, SEM, EPMA, x-ray diffraction and electron diffraction,etc. 利用光鏡、掃描電鏡（SEM）、電子探針（EPMA）、x－射線衍射和電子衍射等試驗方法，對感應料漿法（GL）滲鋁鋼管Fe－Al合金滲層的相組成進行了研究。
- Massive white points outspreading along rolling direction on the surface of Sn-Fe alloy layer was discovered after removing tin coating of tinplates offered by some steel works. 脫去鍍錫板的自由錫層后,在錫鐵合金層的表面目視發現了大量沿軋制方向伸展的白點,並且合金層的耐蝕性隨著白點數量與覆蓋面積的增加而下降。
- With the effect of spraying transitional layer, a stainless steel alloy layer was obtained on the magnesium based metal matrix composites by laser cladding. 利用中間過渡層的作用,在鎂基金屬複合材料上激光熔覆了不鏽鋼合金層,熔覆層與基體為冶金結合。
- Closset B,Gruzleski J E.The Treatment of Liquid Aluminiu Silicon Alloys[M].AFSInc,1990. 黃良余.;鋁硅合金變質機理的新發展[J]
- chrome manganese silicon alloy steel 鉻錳硅盒金鋼
- The carbides of the alloyed layer were compact, uniform and dispersed without coarse eutectic Ledeburite structure. 滲層中的碳化物細小、均勻、彌散，沒有粗大的共晶萊氏體組織；
- The method is rapid and accurate.The shortcut has been offered for analysis the effective silicon of ferro silicon alloys. 本方法快速準確，為硅鐵中有效硅的含量分析提供了一條捷徑。
- Microstructures of the carburized alloyed layer are analysised in detail by TEM. 對滲金屬層滲碳后的組織進行了電子顯微分析。
- Alloyed layer was formed on the surface of titanium by hydrogen-free carburizing using net-shape double cathode method. 採用網狀雙陰極法對純鈦表面進行離子無氫滲碳,在純鈦表面形成冶金結合的高硬度合金滲層;
